Abstract:Stretchable electrodes are an essential component that determines the functionality and reliability of stretchable electronics, but face the challenge of balancing conductivity and stretchability. Here, we propose a new conducting concept called the interfacial percolation network (PN) that results in stretchable electrodes with high conductivity, large stretchability, and high stability. The interfacial PN was composed of a two‐dimensional (2D) PN and a protruding PN embedded on the surface and in the near‐surface region of an elastic polymer matrix, respectively. The protruding PN was the key design to intimately link the 2D conducting channels on the surface of the elastomer with the 3D conducting channels in the bulk of the elastomer. The protruded PN was obtained by changing the arrangements of silver nanowires (AgNWs) from horizontal to quasi‐vertical through introducing foreign polymer domains in the near‐surface region of the polymer matrix. The resulting electrode achieved a conductivity of 13,500 S cm−1 and a stretchability of up to 660%. Its resistance changes (i.e., R/R0) under stretched conditions were orders of magnitude lower than those of conventional 2D PN and 2D + 3D PN. This electrode performed stability in various physicochemical conditions, including being soaked in acid and alkaline solutions for 20 days, heated at 80 °C for 10 days, stretched to 80% for 10000 cycles, and scratched by a sharp needle. The concept of interfacial PN was broadly applicable to common conductors used in stretchable electronics, such as graphene, gold film, Ag film, and liquid metal. The conductivity of the interfacial PN electrode made from liquid metal remained at 46,750 S cm−1 after the electrode underwent multiple stretch‐release cycles with a deformation of >600%. The concept of interfacial PN provides fruitful implications for the design of stretchable electronics. This article is protected by copyright. All rights reserved

3D Printing of Free‐Standing Stretchable Electrodes with Tunable Structure and Stretchability

Direct Fabrication of Stretchable Electronics on a Polymer Substrate with Process‐Integrated Programmable Rigidity

High-performance stretchable electrodes prepared from elastomeric current collectors and binders

Soft Elastomers with Programmable Stiffness As Strain-Isolating Substrates for Stretchable Electronics.

Design of Strain-Limiting Substrate Materials for Stretchable and Flexible Electronics

Origami‐Enabled Stretchable Electrodes Based on Parylene Deposition and 3D Printing

Enhancing the Stability of Stretchable Buckling Electrodes by Incorporating a Sulfhydryl-Anchored Interface with Disordered Pores for Deformable Electronics

Stretchable Electrodes with Interfacial Percolation Network

Mechanics of Stretchable Electronics

3D printing highly stretchable conductors for flexible electronics with low signal hysteresis

Three-Dimensional Stretchable Microelectronics by Projection Microstereolithography (PμSL)

Direct Writing of Liquid Metal onto an Electrospun Graphene Oxide Composite Polymer Nanofiber Membrane for Robust and Stretchable Electrodes

Ultra-robust Stretchable Electrode for E-Skin: in Situ Assembly Using a Nanofiber Scaffold and Liquid Metal to Mimic Water-to-net Interaction

Rubbery stretchable conductors based on 3D printed silver nanowires and their application in wearable optoelectronic devices

Design and 3D Printing of Stretchable Conductor with High Dynamic Stability

Tailoring fractal structure via 3D printing to achieve flexible stretchable electrodes based on Ecoflex/CNT/CF

Fabrication of a flexible and stretchable three-dimensional conductor based on Au–Ni@graphene coated polyurethane sponge by electroless plating

Aligned wave-like elastomer fibers with robust conductive layers via electroless deposition for stretchable electrode applications

3D Printed Stretchable Capacitive Sensors for Highly Sensitive Tactile and Electrochemical Sensing.

Stretchable Substrates with 3D Wave Patterned Surface for Enhanced Mechanical Stability of Indium Tin Oxide Electrodes

Intrinsically Stretchable and Conductive Textile by a Scalable Process for Elastic Wearable Electronics