Abstract:Stretchable electrodes are an essential component that determines the functionality and reliability of stretchable electronics, but face the challenge of balancing conductivity and stretchability. Here, we propose a new conducting concept called the interfacial percolation network (PN) that results in stretchable electrodes with high conductivity, large stretchability, and high stability. The interfacial PN was composed of a two‐dimensional (2D) PN and a protruding PN embedded on the surface and in the near‐surface region of an elastic polymer matrix, respectively. The protruding PN was the key design to intimately link the 2D conducting channels on the surface of the elastomer with the 3D conducting channels in the bulk of the elastomer. The protruded PN was obtained by changing the arrangements of silver nanowires (AgNWs) from horizontal to quasi‐vertical through introducing foreign polymer domains in the near‐surface region of the polymer matrix. The resulting electrode achieved a conductivity of 13,500 S cm−1 and a stretchability of up to 660%. Its resistance changes (i.e., R/R0) under stretched conditions were orders of magnitude lower than those of conventional 2D PN and 2D + 3D PN. This electrode performed stability in various physicochemical conditions, including being soaked in acid and alkaline solutions for 20 days, heated at 80 °C for 10 days, stretched to 80% for 10000 cycles, and scratched by a sharp needle. The concept of interfacial PN was broadly applicable to common conductors used in stretchable electronics, such as graphene, gold film, Ag film, and liquid metal. The conductivity of the interfacial PN electrode made from liquid metal remained at 46,750 S cm−1 after the electrode underwent multiple stretch‐release cycles with a deformation of >600%. The concept of interfacial PN provides fruitful implications for the design of stretchable electronics. This article is protected by copyright. All rights reserved

Enhancing the Stability of Stretchable Buckling Electrodes by Incorporating a Sulfhydryl-Anchored Interface with Disordered Pores for Deformable Electronics

High-performance stretchable electrodes prepared from elastomeric current collectors and binders

Design of Strain-Limiting Substrate Materials for Stretchable and Flexible Electronics

Experimental and Theoretical Studies of Serpentine Microstructures Bonded To Prestrained Elastomers for Stretchable Electronics

Soft Elastomers with Programmable Stiffness As Strain-Isolating Substrates for Stretchable Electronics.

3D Printing of Free‐Standing Stretchable Electrodes with Tunable Structure and Stretchability

Highly Stable Kirigami-Structured Stretchable Strain Sensors For Perdurable Wearable Electronics

Interfacial Engineering for Highly Stable and Stretchable Electrodes Enabled by Printing/Writing Surface‐Embedded Silver and Its Selective Alloying with Liquid Metals

Stiffness and Interface Engineered Soft Electronics with Large-Scale Robust Deformability

Buckling In Serpentine Microstructures And Applications In Elastomer-Supported Ultra-Stretchable Electronics With High Areal Coverage

Design strategy of porous elastomer substrate and encapsulation for inorganic stretchable electronics

Stretchable Electrodes with Interfacial Percolation Network

Direct Writing of Liquid Metal onto an Electrospun Graphene Oxide Composite Polymer Nanofiber Membrane for Robust and Stretchable Electrodes

Highly Stable and Stretchable Conductive Films through Thermal‐Radiation‐Assisted Metal Encapsulation

Prospects and Challenges of Flexible Stretchable Electrodes for Electronics

Ultra-robust Stretchable Electrode for E-Skin: in Situ Assembly Using a Nanofiber Scaffold and Liquid Metal to Mimic Water-to-net Interaction

A Highly‐Adhesive and Self‐Healing Elastomer for Bio‐Interfacial Electrode

Reversibly Stretchable Organohydrogel-Based Soft Electronics with Robust and Redox-Active Interfaces Enabled by Polyphenol-Incorporated Double Networks

Highly Stable Liquid Metal Conductors with Superior Electrical Stability and Tough Interface Bonding for Stretchable Electronics

Deformable Structure Design for Stretchable Biomedical Epidermal Flexible Electrodes

An intrinsically stretchable aqueous Zn-MnO2 battery based on microcracked electrodes for self-powering wearable electronics