Abstract:Aiming at the problem of uneven forces on the inner and outer surfaces during counter-roller spinning (CRS) of thin-walled cylinders, which affects the spinning stability and forming quality, a new dual asymmetric active counter-roller spinning (DAACRS) process is proposed. It enhances the radial strain uniformity through more consistent contact of the inner and outer rollers and the material flow on the inner and outer surfaces. The theoretical analytical model of the influence of the spinning structural and process parameters on the contact condition and the oriented relationship is established. On this basis, the Kriging predictive surrogate model under the coupling influence of these parameters is established, and the spinning parameters optimized by the multi-objective particle swarm optimization (MOPSO) algorithm in the global continuous variables are obtained. The radial strain gradient effect of traditional spun parts is basically eliminated under this process parameters. Additionally, an active counter-roller spinning (ACRS) machine is independently developed and a comprehensive macro-micro quality evaluation method is proposed. The ACRS process can transform the material from dispersed {001}<110> low-strength plate texture to more standard {001}<100> high-strength plate texture, and obtain balanced axial and circumferential tensile strengths. Moreover, the new DAACRS process resulted in more balanced forming accuracy, inner and outer surface grain size, texture strength, and isotropic mechanical properties due to the high radial strain uniformity. Compared with the traditional completely symmetric active counter-roller spinning (CSACRS), the L ̅ , O ̅ , U D, U T{100}, U T{110}, and U T{111} are improved by 0.08265 mm, 0.00335 mm, 4.83%, 10.55%, 11.54%, and 16.34%, respectively. Further analysis provides that the allowable values of strain uniformity for the higher quality thin-walled cylinders are [U ε(PEEQ)]=0.365 and [U ε(Max Principal)]=0.438. These results increase the understanding of the strain change, microstructure evolution, and mechanical properties change mechanism of the CRS process, thereby providing important guidance for improving the CRS process and forming quality.

Study on multi-roller flow forming process of aluminum alloy cylinders with cross ribs

Study on generating rolling method for manufacturing cylindrical parts with external cross ribs

Study on Counter-Roller Spinning Technology of Large Diameter Aluminum Alloy Cylindrical Parts

Effects of Forming Parameters on Deformation Uniformity of Thin-walled Parts during Multi-pass Spinning

Spinning deformation mechanism of aluminum alloy cylinder with multi-level stiffeners based on numerical simulation

Research on the Mechanism and Processability of Roll Forming

Study on warm forming process of rigid-flexible composite drawing based on numerical simulation

Process design and finite element analysis of multi-station two-roller cassette hot rolling for aluminum alloy 6061 wire

Deformation mechanism of ZK61 magnesium alloy cylindrical parts with longitudinal inner ribs during hot backward flow forming

Multi-pass rolling-extrusion of large-scale thin-walled square tube with longitudinal inner ribs

Effect of multi-point roller dies on the forming accuracy of profile in flexible 3D stretch bending technology

Enhancing radial strain uniformity of thin-walled cylinder by the dual asymmetric active counter-roller spinning process

Forming characteristics and mechanism of double-roll rotary forging for large-diameter and thin-walled metal discs

Effect of Shape Tool Parameters on the Performance of Cold Circular Three-Dimensional Pilger Cross-Section Roll Forming

Full active counter-roller spinning for thin-walled cylinders: macroscopic deformation mechanism, mesoscopic texture evolution, and forming performance strengthening

Influence of the rotational speed ratio of rollers on the three-dimensional surface rolling process

Multi-pass Spinning of Thin-Walled Tubular Part with Longitudinal Inner Ribs

Investigation on the roll-to-plate microforming of riblet features with the consideration of grain size effect

Numerical Model Simulation of the Double-Roll Rotary Forging of Large Diameter Thin-Walled Disk

Study of microstructure evolution of magnesium alloy cylindrical part with longitudinal inner ribs during hot flow forming by coupling ANN-modified CA and FEA

Influence of Inner Roller Geometric Parameters on Counter-Roller Spinning with 6061 Aluminum Alloy Tube