Abstract:Wood as a material is a natural composite with a complex hierarchically arranged structure. All scale levels of wood structure contribute to its macroscopic mechanical properties. The nature of such characteristics and deformation modes differs radically at different scale levels. Wood macroscopic properties are well studied, and the relevant information can be easily found in the literature. However, the knowledge of the deformation mechanisms at the mesoscopic level corresponding to the cellular structure of early and late wood layers of annual growth rings is insufficient. It hinders building the comprehensive multiscale model of how wood mechanical properties are formed. This paper described the results of scanning of mechanical properties of softwood and hardwood samples, such as common pine, small-leaf lime, and pedunculate oak, by means of nanoindentation (NI). The NI technique allows varying the size of deformed region within a wide range by altering maximal load ( P max ) applied to the indenter so that one can repeatedly and non-destructively test wood structural components at different scale levels on the same sample without changing the technique or equipment. It was discovered that the effective microhardness ( H eff ) and Young's modulus ( E eff ) decreased manifold with P max growing from 0.2 to 2 000 mN. This drop in H eff was observed when the locally deformed region grew, and resulting from P max increase generally follows the rule similar to the Hall-Petch relation for yield stress, strength, and hardness initially established for metals and alloys, though obviously in those cases the underlying internal mechanisms are quite different. The nature and micromechanisms of such size effect (SE) in wood revealed using NI were discussed in this study. At P max 200 mN, the indentation encompassed several cells. The measured mechanical properties were significantly affected by bending deformation and buckling collapse of cell walls, reducing H eff and E eff substantially. At P max ≈ 1–100 mN, an indenter interacted with different elements of the cell structure and capillary network, resulting in intermediate values of H eff and E eff . Abrupt changes in H eff and E eff at annual growth ring boundaries allow accurate measuring of rings width, while smoother and less pronounced changes within the rings allow identification of earlywood and latewood layers as well as any finer changes during vegetation season. The values of ring width measured using NI and standard optical method coincide with 2%−3% accuracy. The approaches and results presented in this study could improve the understanding of nature and mechanisms lying behind the micromechanical properties of wood, help to optimize the technologies of wood farming, subsequent reinforcement, and utilization, as well as to develop new highly informative techniques in dendrochronology and dendroclimatology.

Mechanism of wood deformation cascading from nanoscale to macroscale in response to moisture desorption

Hygromechanical Deformation of Wood Cell Walls Regulated by the Microfibril Angle

Wood Deformation Leads to Rearrangement of Molecules at the Nanoscale

How to Regulate Moisture-Induced Stresses in Composites: the Answer from Nanostructure of S2 Layer in Wood Cell Wall

Small-Angle Neutron Scattering as a New Tool to Evaluate Moisture-Induced Swelling in the Nanostructure of Chemically Modified Wood Cell Walls*

Micromechanics of Wood Cell Wall

Multi-scale finite element simulation on large deformation behavior of wood under axial and transverse compression conditions

Review on Wood Deformation and Cracking During Moisture Loss

Multiscale Wood Micromechanics and Size Effects Study via Nanoindentation

How Weak Hydration Interfaces Simultaneously Strengthen and Toughen Nanocellulose Materials

Wood dimensional stability enhancement by multivalent metal-cation-induced lignocellulosic microfibrils crosslinking

Assessing Multi-Scale Deconstruction of Wood Cell Wall Subjected to Mechanical Milling for Enhancing Enzymatic Hydrolysis

Small-angle X-ray Scattering Study on Nanostructural Changes with Water Content in Red Pine, American Pine, and White Ash

A Multiscale Mechanics Model for Elastic Properties of Densified Wood

Development of super dimensional stable poplar structure with fire and mildew resistance by delignification/densification of wood with highly aligned cellulose molecules

Super-strong and flexible wood through cell wall swelling-assisted spontaneously fibers aggregation

Effect of Moisture on Polymer Deconstruction in HCl Gas Hydrolysis of Wood

Moisture changes and surface checking development during drying of Masson pine wood

The Effect of Shrinkage Anisotropy on Tangential Rheological Properties of Asian White Birch Disks

Water Effects on the Deformation and Fracture Behaviors of the Multi-Scaled Cellular Fibrous Bamboo.

The Biomechanical Role of the Functionally Graded Microfibrils in the Wood Cell Wall