Abstract:Previous research found that some organosilicon treatments proved effective in stabilizing waterlogged wood dimensions during drying. The present research aimed to determine the mechanism of wood stabilization by these chemicals to understand their mode of action. The study used chemically (ChP) and biologically degraded (BP) model Scots pine wood treated with Methyltrimethoxysilane (MTMS), (3-Mercaptopropyl) trimethoxysilane (MPTMS), or 1,3-Bis(diethylamino)-3-propoxypropanol)-1,1,3,3-tetramethyldisiloxane (DEAPTMDS). Synchrotron-based X-ray fluorescence microscopy (XFM) was used to investigate the penetration of organosilicons into the wood cellular structure and cell walls, and nanoindentation was used to study the mechanical properties of the treated wood cell walls. All treatments resulted in high volumetric anti-shrink efficiency (ASE V ) values of 74–82%, except for MTMS-treated ChP with an ASE V of 52%. The multiscale XFM results revealed that all applied organosilicons penetrated throughout the whole wooden blocks and deposited in both cell lumina and cell walls. The retention of all applied organosilicons was highest in BP wood, and so was the dimensional stabilization effect. MTMS-treated ChP had the lowest measured cell wall infiltration, which likely contributed to its lower ASE v . DEAPTMDS treatments plasticized the cell walls and resulted in lowered nanoindentation elastic modulus ( E s NI ) and hardness ( H ) for all types of wood. MTMS and MPTMS had modest effects on cell wall mechanical properties, and the effect depended on the type of wood. The final effect of organosilicon treatment on the dimensional wood stabilization and mechanical properties of wood cell walls depended not only on the type of the applied organosilicon but also the type of wood degradation. This means that the treatment cannot be considered universal, and specific approaches are needed for the conservation of individual wooden objects. Although some mechanisms are now better understood, such as the need for organosilicons to infiltrate the cell walls and the plasticizing effect of DEAPTMDS, other aspects will benefit from a more detailed analysis of the molecular interactions between organosilicons and wood polymers.

Wood dimensional stability enhancement by multivalent metal-cation-induced lignocellulosic microfibrils crosslinking

Role of surface treatment on water absorption of poly(vinyl chloride) composites reinforced by Phyllostachys pubescens particles

Dimensionally stable and durable wood by lignin impregnation

Modification of wood cell wall with water-soluble vinyl monomer to improve dimensional stability and its mechanism

Development of super dimensional stable poplar structure with fire and mildew resistance by delignification/densification of wood with highly aligned cellulose molecules

Mechanism of wood deformation cascading from nanoscale to macroscale in response to moisture desorption

Polyethylene glycol and silica sol penetration improves hydrophobicity and dimensional stability of wood after a short-time treatment

Hygromechanical Deformation of Wood Cell Walls Regulated by the Microfibril Angle

Super-strong and flexible wood through cell wall swelling-assisted spontaneously fibers aggregation

Manufacturing and Characterization of Modified Wood with In Situ Polymerization and Cross-linking of Water-Soluble Monomers on Wood Cell Walls

Fabrication of ionic wood crosslinked by Ca2+ with high strength, toughness, and weather resistance

Conservation of model degraded pine wood with selected organosilicons studied by XFM and nanoindentation

Plant cell wall reconstruction towards enhancing moisture stability and toughness by assembling delignified wood with alkali lignin

In Situ Construction of Thermotropic Shape Memory Polymer in Wood for Enhancing Its Dimensional Stability

Improvement of Water Resistance and Dimensional Stability of Wood Through Titanium Dioxide Coating

Fabrication of Mildew-Resistant Wood with Multi-Functional Properties Based on In Situ Growth of Metal–Organic Frameworks

Optimization of mechanical properties and dimensional stability of densified wood using response surface methodology

Improvement of dimensional stability of wood by silica nanoparticles

An effective technique for constructing wood composite with superior dimensional stability

Metal‐Ion Induced Surface Modification for Durable Hydrophobic Wood

Effect of Impregnation with Maltodextrin and 1,3-Dimethylol-4,5-dihydroxyethyleneurea on Poplar Wood