Abstract:Developing a high-strength, flame-resistant structural material derived from wood is desirable for advanced applications in the transportation, construction, automotive, and aerospace sectors. Here, a low-cost and high-efficiency top-down method was designed for processing natural wood veneers into lightweight yet strong bulk structural wood-based composites. The composites were produced using delignified wood veneers as a continuous reinforcing material and epoxy resin as the adhesive, followed by hot pressing. Densification of the veneers and good adhesion among the veneers played a pivotal role in the mechanical performance of the composites. A record-high flexural strength of 436.1 MPa and a toughness of 12.3 MJ·m–3 were achieved. Furthermore, the low density of the wood composite led to a specific flexural strength of 323.0 MPa·cm3·g–1, which is significantly greater than those reported for other wood-based composites and some metal materials (e.g., steels and alloys). We also explored the feasibility of using the composite in unmanned drones. In addition, the delignified wood veneers were infiltrated with 1.5% ammonium polyphosphate (APP), which improved the fire-retardant and self-extinguishing properties of the composites. This work demonstrates that high-strength wood products exhibit significant potential in many applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.0c09390.Molding process of DWLC-41.4% with different shapes (Figure S1); delignified wood panels with different lignin removal contents (Figure S2); thickness swelling (24 h) (Figure S3); SEM images of DWLC-0%, DWLC-23.2%, and DWLC-55.1% (Figure S4); micro-CT images (Figure S5); tensile and flexural strength of DWLC-41.4% with and without epoxy resin (Figure S6); photographs of wood veneer pull-out tests: before (left) and after (right) (Figure S7); bonding strength of wood veneer and epoxy resin (Figure S8); microstructure of fracture surfaces of pure epoxy resin (Figure S9); compressive strength of natural birch wood and DWLC-41.4% (Figure S10); mechanical properties and microstructures of DWLCs with and without flame retardant (Figure S11); TG curves of DWLC, 1.5% APP/DWLC, and 2.5% APP/DWLC (Figure S12); mass loss of DWLC, 1.5% APP/DWLC, and 2.5% APP/DWLC after the cone test (Figure S13); TSR curves of DWLC, 1.5% APP/DWLC, and 2.5% APP/DWLC (Figure S14); XPS spectra of P of 1.5% APP/DWLC and 2.5% APP/DWLC (Figure S15); comparison of TTI between DWLC-41.4% and other wood-based composites (Table S1); and XPS analysis of the external char of DWLC-41.4% with and without flame retardant (Table S2) (PDF)Takeoff process of an unmanned drone (Movie S1) (MP4)This article has not yet been cited by other publications.

Plant cell wall reconstruction towards enhancing moisture stability and toughness by assembling delignified wood with alkali lignin

Reconstructed wood with high water stability from bark cellulose and corncob lignin

Development of super dimensional stable poplar structure with fire and mildew resistance by delignification/densification of wood with highly aligned cellulose molecules

A Strong, Tough and Fire-Retardant Biomimetic Multifunctional Wooden Laminate

Dimensionally stable and durable wood by lignin impregnation

Super-strong and flexible wood through cell wall swelling-assisted spontaneously fibers aggregation

Laminating Delignified Wood Veneers toward High-Strength, Flame-Retardant Composites for Structural Applications

Strong/Stiff Exterior and Elastic Interior: An Effective Biomimetic Topological Structure for the Consolidation of Waterlogged Wooden Archaeological Relics during Dehydration

Processing Waste Lignocellulose Biomass into Eco-Friendly Structural Material Via a Scalable Binder-Free Lamination

Preparation of an Environment-Friendly Fiberboard with High Mechanical Strength Using Delignified Wood Fiber

Characterization of Microstructure, Chemical, and Physical Properties of Delignified and Densified Poplar Wood

High-Performance Wet Adhesion of Wood with Chitosan

Preparing the Reinforced Wood Via Embedding Cellulose Nanocrystals (CNC) into Delignified Fast-Growing Wood Followed by Densification

Hydrostable Reconstructed Wood with Transparency, Excellent Ultraviolet-Blocking Performance, and Photothermal Conversion Ability

Fabrication of ionic wood crosslinked by Ca2+ with high strength, toughness, and weather resistance

Hemicellulose-rich Transparent Wood: Microstructure and Macroscopic Properties.

In Situ Wood Delignification toward Sustainable Applications

Effect of Partial Delignification and Densification on Chemical, Morphological, and Mechanical Properties‏ of Wood: Structural Property Evolution

Bio-inspired, epoxy-based lamellar composites with superior fracture toughness by delignified wood scaffold

An Energy‐Efficient, Wood‐Derived Structural Material Enabled by Pore Structure Engineering Towards Building Efficiency

Epoxy-Acrylic Polymer In-Situ Filling Cell Lumen and Bonding Cell Wall for Wood Reinforcement and Stabilization