Abstract:Developing a high-strength, flame-resistant structural material derived from wood is desirable for advanced applications in the transportation, construction, automotive, and aerospace sectors. Here, a low-cost and high-efficiency top-down method was designed for processing natural wood veneers into lightweight yet strong bulk structural wood-based composites. The composites were produced using delignified wood veneers as a continuous reinforcing material and epoxy resin as the adhesive, followed by hot pressing. Densification of the veneers and good adhesion among the veneers played a pivotal role in the mechanical performance of the composites. A record-high flexural strength of 436.1 MPa and a toughness of 12.3 MJ·m–3 were achieved. Furthermore, the low density of the wood composite led to a specific flexural strength of 323.0 MPa·cm3·g–1, which is significantly greater than those reported for other wood-based composites and some metal materials (e.g., steels and alloys). We also explored the feasibility of using the composite in unmanned drones. In addition, the delignified wood veneers were infiltrated with 1.5% ammonium polyphosphate (APP), which improved the fire-retardant and self-extinguishing properties of the composites. This work demonstrates that high-strength wood products exhibit significant potential in many applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.0c09390.Molding process of DWLC-41.4% with different shapes (Figure S1); delignified wood panels with different lignin removal contents (Figure S2); thickness swelling (24 h) (Figure S3); SEM images of DWLC-0%, DWLC-23.2%, and DWLC-55.1% (Figure S4); micro-CT images (Figure S5); tensile and flexural strength of DWLC-41.4% with and without epoxy resin (Figure S6); photographs of wood veneer pull-out tests: before (left) and after (right) (Figure S7); bonding strength of wood veneer and epoxy resin (Figure S8); microstructure of fracture surfaces of pure epoxy resin (Figure S9); compressive strength of natural birch wood and DWLC-41.4% (Figure S10); mechanical properties and microstructures of DWLCs with and without flame retardant (Figure S11); TG curves of DWLC, 1.5% APP/DWLC, and 2.5% APP/DWLC (Figure S12); mass loss of DWLC, 1.5% APP/DWLC, and 2.5% APP/DWLC after the cone test (Figure S13); TSR curves of DWLC, 1.5% APP/DWLC, and 2.5% APP/DWLC (Figure S14); XPS spectra of P of 1.5% APP/DWLC and 2.5% APP/DWLC (Figure S15); comparison of TTI between DWLC-41.4% and other wood-based composites (Table S1); and XPS analysis of the external char of DWLC-41.4% with and without flame retardant (Table S2) (PDF)Takeoff process of an unmanned drone (Movie S1) (MP4)This article has not yet been cited by other publications.

A Strong, Tough and Fire-Retardant Biomimetic Multifunctional Wooden Laminate

A strong, flame-retardant, and thermally insulating wood laminate

Laminating Delignified Wood Veneers toward High-Strength, Flame-Retardant Composites for Structural Applications

Dense, Self‐Formed Char Layer Enables a Fire‐Retardant Wood Structural Material

An environment-friendly, fire-resistant, thermal-insulating and mechanical-robust wood with anisotropic capacitive pressure-sensitive performance

Multifunctional Flame-Retardant, Thermal Insulation, and Antimicrobial Wood-Based Composites.

Fire-retardant anti-microbial robust wood nanocomposite capable of fire-warning by graded-penetration impregnation

Flame Retardant Material Based on Cellulose Scaffold Mineralized by Calcium Carbonate

Effective strategy for fabricating surface impregnated and unilaterally densified wood with furfuryl alcohol/flame retardants for enhanced mechanical performance and flame retardancy

Sandwich-structure inspired super-tough and fire-resistant plywood containing vinyl acetate-ethylene based adhesive reinforced by melamine amino trimethyl phosphate and sodium lignosulfonate

Plant cell wall reconstruction towards enhancing moisture stability and toughness by assembling delignified wood with alkali lignin

Development of super dimensional stable poplar structure with fire and mildew resistance by delignification/densification of wood with highly aligned cellulose molecules

A flame-retardant densified wood as robust and fire-safe structural material

High-Performance All-Bio-Based Laminates Derived from Delignified Wood

Fabrication of ionic wood crosslinked by Ca2+ with high strength, toughness, and weather resistance

Improved Mechanical Properties and Flame Retardancy of Wood/PLA All‐Degradable Biocomposites with Novel Lignin‐Based Flame Retardant and TGIC

High strength, superior fire retardancy, and dimensional stability of cellulosic hybrids

Solid Wood Modification toward Anisotropic Elastic and Insulative Foam-Like Materials

Ultra-flexible flame-retardant wood composites with resistance to extreme temperatures and mildew

Transparent, UV Blocking, and Strong Wood-Based Biocomposites with Isotropic Optical and Mechanical Properties

Processing Bulk Natural Bamboo into a Strong and Flame-Retardant Composite Material