Abstract:Modern aero and power industry needs high-performance gas turbine. Directional solidification (DS) columnar grain and single crystal (SX) blade as key parts of gas turbine serve in heavy stress and high temperature conditions. The DS and SX blade are mainly produced by high rapid solidification (HRS) method, and HRS is one of useful DS technology, which has a property that the heat dissipating ways are changing during the process and the temperature gradients will vary correspondingly. The dendrite grain arrays were the substructure of a DS or SX blade. The structure of the dendrite grain arrays influences the mechanical property of the final casting very much, but is seriously affected by the solidification parameters, such as temperature gradient. In this work, the dendrite grain growth of DD6 superalloy was studied based on cellular automaton- finite difference (CA-FD) model concerning the HRS method's macro solidification parameters. Mathematic models for dendrite grain growth controlled by temperature field and solute field were built to describe the competitive growth and morphology evolution of dendrite grains. Then the dendrite calculation model was coupled with the models of DS process calculation, and some HRS solidification parameters were included, such as withdrawal rate, pouring temperature, etc. The coupled models were used to predict the dendrite grain competitive growth of DD6 superalloy during the DS process. The variation of solute distribution and the dynamic adjustment of dendritic spacing during the process could be predicted by simulating calculation. The DS experiment was carried out with a cylinder sample, and dendrite grains' distribution in the transverse and longitude section was observed by OM and SEM. Then the simulated dendritic morphology was compared with that by experiment. The primary and secondary dendritic spacing by experiment and simulation were measured, and the compared results revealed that as the DS process going on the temperature gradient decreased gradually and the primary dendritic spacing was increasing. So simulation results of the DS dendritic competitive growth were validated by the experiment results, and the proposed models could predict the dendrite grain morphology and the adjustments of DS dendritic spacing of DD6 superalloy very well.

Prediction of Primary Dendritic Arm Spacing During Laser Rapid Directional Solidification of Single-Crystal Nickel-Base Superalloys

Prediction of Primary Dendrite Arm Spacing in Pulsed Laser Surface Melted Single Crystal Superalloy

Prediction of Primary Dendrite Arm Spacing of the Inconel 718 Deposition Layer by Laser Cladding Based on a Multi-Scale Simulation

Prediction of solidification microstructure of titanium aluminum intermetallic alloy by laser surface remelting

Numerical Modeling of Microstructure Evolution During Laser Additive Manufacturing of a Nickel-Based Superalloy

Effects of Melt Convection on Stray Grain Formation in Single Crystal Superalloys During Directed Energy Deposition

Numerical Simulation and Experimental Casting of Nickel-Based Single-Crystal Superalloys by HRS and LMC Directional Solidification Processes

Microstructure Prediction of Laser Surface Remelting Zone of Single Crystal Alloy Dd2

A new strategy to inhibit stray grain formation during laser directed solidification of single crystal superalloys

Numerical Simulation of Dendrite Growth in Nickel-Based Superalloy and Validated by In-Situ Observation Using High Temperature Confocal Laser Scanning Microscopy

Toward multiscale simulations for solidification microstructure and microsegregation for selective laser melting of nickel-based superalloys

Effects of Scanning Speed on Microstructure in Laser Surface-Melted Single Crystal Superalloy and Theoretical Analysis

Numerical Simulation of Dendrite Grain Growth of Dd6 Superalloy During Directional Solidification Process

Primary cellular/dendritic spacing selection in rapidly solidified peritectic alloy

Primary Dendrite Spacing Selection During Directional Solidification of Multicomponent Nickel-Based Superalloy: Multiphase-Field Study

Particle-scale computational fluid dynamics simulation on selective parallel dual-laser melting of nickel-based superalloy

Modeling of epitaxial growth of single crystal superalloys fabricated by directed energy deposition

COLUMNAR DENDRITE MORPHOLOGY AND SOLUTE CONCENTRATION OF GH3039 NICKEL-BASED SUPERALLOYS DURING WIRE AND LASER ADDITIVE MANUFACTURING: INSIGHTS FROM PHASE FIELD SIMULATIONS

Multi-scale Modeling of Liquid-Metal Cooling Directional Solidification and Solidification Behavior of Nickel-Based Superalloy Casting

On the primary spacing and microsegregation of cellular dendrites in laser deposited Ni-Nb alloys

Solidification Microstructure Prediction of Ti-6Al-4V Alloy Produced by Laser Melting Deposition