Abstract:Diamond thin films doped with various boron concentrations were grown on WC-Co cemented carbide tools by hot-filament-assisted chemical vapor deposition (HFCVD). The trimethyl borate dissolved in acetone solution was used as the boron resource (B/C=0%, 0.1%, 0.3%. 0.5%). The surface morphology of diamond films with different boron contents was investigated by Scanning electron microscopy, the adhesive strength was calculated by means of indentation test under a load of 1500N. A real cutting performance was carried out on Al metal matrix composites material (20vol%SiC, 15 mu m), and the insert flank wear was examined by measuring the scars that appeared on the cutting edge with tool microscope. The research results shown the surface morphology and structure of the diamond films changed owing to boron doping. As the doping levels increased, the average grain size of the films decreased from 10 to 2 mu m. A significant improvement in adhesion and cutting performance were observed as the boron contents increased from 0% to 0.5%. The adhesion and cutting performance were best when the boron concentration was 0.3%. Adequate boron can effectively suppress the cobalt diffusion to the substrate surface and avoid the catalytic effect of cobalt at the high temperature. It is of great significance for improvement of the adhesive strength and cutting performance of diamond-coated tools using above method.

Research on the Evolution of Preparation of the Boron Carbide Power

Research Progress of Boron Carbide Coating Materials

New Progress in the Preparation of Sintering and Application of Boron Carbide Ceramics

Development of boron carbides

Preparation of Monophasic Tungsten boride powder from Tungsten and boron carbide

Preparation of novel carborane-containing boron carbide precursor and its derived ceramic hollow microsphere

Preparation of Nano-Zrb2 Powder by Ca Liquid Assisted Boronation Reaction Between ZrC and B4C

Preparation of Submicron Boron Carbide Powder Through Gas-Solid Reaction Method

Optimal preparation of high-entropy boride-silicon carbide ceramics

Study on Boron Carbide Ceramics Sintering Method

Preparation of Amorphous Si-B-C-N Powders and Nano-Sized Ceramics

Experimental Study on Boron Carbide Coating Prepared by Electromagnetically Accelerated Plasma Spraying

Research progress of high hardness B-C-O compounds

Synthesis and Densification of Boron Carbide Nanowires

Research Progress on Preparation and Properties of Zirconium Carbide Matrix Composites

Study on borides and its composites

Fabrication and characterization of hot-pressed B-rich boron carbide

Synthesis of Ultra-Fine and High-Pure Zirconium Diboride Powders Using Solution-Based Processing

Effect of Boron Concentration on Adhesion and Cutting Performance of Diamond-Coated Cemented Carbide Tools

Boron Oxide on the Surface of Grains from Superhard Materials as a Possible Factor Increasing the Performance Characteristics of Grinding Tools

Investigation of the effect of impurity of precursor materials on Si‐doped boron carbide properties