Abstract:All-inorganic metal halide perovskite materials have attracted considerable attention in display and lighting fields due to their excellent photoelectric properties. It has been found that post treatment, especially postannealing process generally plays crucial roles in promoting the crystal quality and properties of the perovskite films, as well as the performance of the relevant devices, but the promotion mechanism has not been reached thoroughly yet. Herein, we successfully synthesized the CsPbBr3 perovskite films through dual-source co-evaporation of CsBr and PbBr2 by applying the molecular beam epitaxy (MBE) technique in an ultrahigh vacuum system. The effects of post-annealing on the structure and optical property were systematically studied for the films, and the optimal post-annealing condition was determined to be 90 degrees C for 10 min. As the characterization results by SEM, XRD, PL, etc., shown, the optimizing effect is attributed to the size change and the quality enhancement of the CsPbBr3 microcrystals in the films with temperature. Using CsPbBr3 films as the emitting layers, the perovskite light-emitting diodes (PeLEDs) with the configuration of ITO/PVK/CsPbBr3/TPBi/ LiF/Al were constructed with the optimized emitting layer of 200 nm. The device shows pure green emission at a wavelength of 527 nm with a narrow full width at half-maximum of 19 nm. The post-annealing optimized device achieved an external quantum efficiency (EQE) of 1.6 % along with a maximum luminance of 39,700 cd/m2, which represents a significant improvement over the device consisting of unannealed CsPbBr3 film, with the EQE increased by 1.6 times and the luminance increased by 4.7 times.

Thin Film Perovskite Light-Emitting Diode Based on Cspbbr3 Powders and Interfacial Engineering

Kinetic Control of Perovskite Thin-Film Morphology and Application in Printable Light-Emitting Diodes

Efficient Light-Emitting Diodes Based on Nanocrystalline Perovskite in A Dielectric Polymer Matrix

Efficient Flexible Inorganic Perovskite Light-Emitting Diodes Fabricated with CsPbBr3 Emitters Prepared Via Low-Temperature in Situ Dynamic Thermal Crystallization

Efficient Solid-State Electrochemiluminescence from High-Quality Perovskite Quantum Dot Films.

Efficient Radiative Enhancement in Perovskite Light‐Emitting Devices Through Involving a Novel Sandwich Localized Surface Plasmon Structure

Solution-processed Highly Bright and Durable Cesium Lead Halide Perovskite Light-Emitting Diodes.

Enhanced Optical and Electrical Properties of Polymer-Assisted All-Inorganic Perovskites for Light-Emitting Diodes

High Quality CsPbI3−xBrx Thin Films Enabled by Synergetic Regulation of Fluorine Polymers and Amino Acid Molecules for Efficient Pure Red Light Emitting Diodes

Improving the Performance and Stability of Perovskite Light-Emitting Diodes by a Polymeric Nanothick Interlayer-Assisted Grain Control Process

Tuning Hole Transport Layers and Optimizing Perovskite Films Thickness for High Efficiency CsPbBr3 Nanocrystals Electroluminescence Light-Emitting Diodes

High Quality CsPbI 3− x Br x Thin Films Enabled by Synergetic Regulation of Fluorine Polymers and Amino Acid Molecules for Efficient Pure Red Light Emitting Diodes

Tailoring the Surface Morphology and Phase Distribution for Efficient Perovskite Electroluminescence.

High‐Performance Perovskite Light‐Emitting Diodes Enabled by Passivating Defect and Constructing Dual Energy‐Transfer Pathway Through Functional Perovskite Nanocrystals

Efficient and Color-Tunable Quasi-2D CsPbBrxCl3–x Perovskite Blue Light-Emitting Diodes

Highly Emissive Green Metal Halide Perovskite Solids: Formation Kinetics, Enhanced Heat, Light, and Polar Solvent Resistance, and Light-Emitting Application

Achieving high-performance <i>in situ</i> fabricated FAPbBr<sub>3</sub> and electroluminescence

Effects of Post-Annealing on the Property of CsPbBr3 Films and the Performance of Relevant Light-Emitting Diodes

Efficient Thermally Evaporated Perovskite Light-Emitting Devices Via a Bilateral Interface Engineering Strategy.

Phase Engineering for Highly Efficient Quasi-Two-Dimensional All-Inorganic Perovskite Light-Emitting Diodes Via Adjusting the Ratio of Cs Cation.

Improved Outcoupling Efficiency and Stability of Perovskite Light‐Emitting Diodes using Thin Emitting Layers