Abstract:Micro-/nanosized organic–inorganic hybrid perovskite single crystals (SCs) with appropriate thickness and high crystallinity are promising candidates for high-performance electroluminescent (EL) devices. However, their small lateral size poses a great challenge for efficient device construction and performance optimization, causing perovskite SC-based light-emitting diodes (PSC-LEDs) to demonstrate poor EL performance. Here, we develop a facile liquid-insulator bridging (LIB) strategy to fabricate high-luminance PSC-LEDs based on single-crystalline CH3NH3PbBr3 microflakes. By introducing a blade-coated poly(methyl methacrylate) (PMMA) insulating layer to effectively overcome the problems of leakage current and possible short circuits between electrodes, we achieve the reliable fabrication of PSC-LEDs. The LIB method also allows us to systematically boost the device performance through crystal growth regulation and device architecture optimization. Consequently, we realize the best CH3NH3PbBr3 microflake-based PSC-LED with an ultrahigh luminance of 136100 cd m–2 and a half-lifetime of 88.2 min at an initial luminance of ∼1100 cd m–2, which is among the highest for organic–inorganic hybrid perovskite LEDs reported to date. Moreover, we observe the strong polarized edge emission of the microflake-based PSC-LEDs with a high degree of polarization up to 0.69. Our work offers a viable approach for the development of high-performance perovskite SC-based EL devices.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsnano.2c00488.Schematic reparation process of the perovskite SCs, cross-sectional SEM images of the perovskite SC and PSC-LED, in-plane XRD and SAED pattern of the microflake, schematic illustration of the home-built EL measurement system, EL performance of the polycrystalline perovskite film-based LEDs, angle-dependent EL spectra of the PSC-LED, PLQY and TRPL data of the microflakes prepared with and without FOTS treatments, UPS spectra of the perovskite SCs, waveguide behavior of the MAPbBr3 SC, and the comparison of the representative PSC-LEDs reported to date. (PDF)Movie S1: The PSC-LED is operated at a consistent voltage of 7.0 V. (MP4)This article has not yet been cited by other publications.

CsPbBr3/Porous‐SiO2 Composite Film for Efficient Perovskite Light‐Emitting Diodes

Efficient Flexible Inorganic Perovskite Light-Emitting Diodes Fabricated with CsPbBr3 Emitters Prepared Via Low-Temperature in Situ Dynamic Thermal Crystallization

Highly Compact CsPbBr3 Perovskite Film Decorated by PEO for Light-Emitting Diodes

Enhanced Optical and Electrical Properties of Polymer-Assisted All-Inorganic Perovskites for Light-Emitting Diodes

Double Electron Transport Layer and Optimized CsPbI3 Nanocrystal Emitter for Efficient Perovskite Light-Emitting Diodes

Dual-Shell Protection Enables Highly Efficient and Stable All-Inorganic Perovskite Composites for Light-Emitting-Diodes

Rapid Crystallization of All-Inorganic CsPbBr3 Perovskite for High-Brightness Light-Emitting Diodes

Efficient All‐Perovskite White Light‐Emitting Diodes Made of In Situ Grown Perovskite‐Mesoporous Silica Nanocomposites

Hard and Soft Lewis-base Behavior for Efficient and Stable CsPbBr3 Perovskite Light-Emitting Diodes

Bright and Efficient Perovskite Light Emitting Electrochemical Cells Leveraging Ionic Additives

High-Luminance Microsized CH 3 NH 3 PbBr 3 Single-Crystal-Based Light-Emitting Diodes via a Facile Liquid-Insulator Bridging Route

Solution-Processed Quasi-Two-Dimensional/Nanoscrystals Perovskite Composite Film Enhances the Efficiency and Stability of Perovskite Light-Emitting Diodes

Highly Efficient CsPbBr3 Perovskite Nanocrystal Light-Emitting Diodes with Enhanced Stability Via Colloidal Layer-by-Layer Deposition

Improving the Performance and Stability of Perovskite Light-Emitting Diodes by a Polymeric Nanothick Interlayer-Assisted Grain Control Process

In-Situ Sintered CsPbBr 3/cspb 2br 5 Perovskite Nanocrystals into Mesoporous Silica for White High-Efficiency LEDs

Full coverage all-inorganic cesium lead halide perovskite film for high-efficiency light-emitting diodes assisted by 1,3,5-tri(m-pyrid-3-yl-phenyl)benzene

Solution-processed Highly Bright and Durable Cesium Lead Halide Perovskite Light-Emitting Diodes.

Highly electroluminescent and stable inorganic CsPbI2Br perovskite solar cell enabled by balanced charge transfer

Efficient and Stable CsPbBr3/Cs4PbBr6 Composite Powders Passivated and Encapsulated with a Novel Silicon-Based Ligand

Efficient Radiative Enhancement in Perovskite Light‐Emitting Devices Through Involving a Novel Sandwich Localized Surface Plasmon Structure

Smoothing Energy Transfer Enabling Efficient Large‐Area Quasi‐2D Perovskite Light‐Emitting Diodes