Abstract:In this letter, a hybrid multiorder wide bandpass frequency selective surface (FSS) with high selectivity and low insertion loss is achieved by combining the two-dimensional (2-D) FSS structure and the 3-D vertical structure. The 3-D periodic vertical printed circuit board pieces (PVPCB) are used as the dielectric layer in the unit cell to achieve a proper band flatness without introducing great insertion loss. The multiorder response of the proposed FSS is achieved using a series of 3-D PVPCB instead of stacking the 2-D FSS layers. The proposed FSS unit cell is constructed by combining the full-wave and equivalent circuit simulations, since the physical structures have a good one-to-one correspondence with the circuit elements. The module design method is used to accelerate the design procedure, and the simulation result proves the effectiveness of this design method. Finally, the prototype is fabricated and measured to prove the effectiveness of the proposed FSS. The measured relative bandwidth and rectangle coefficient achieved is 130.4 and 0.76, respectively. The measured maximum insertion loss over the whole passband is 0.7 dB. Because of its strong capability of out-of-band rejection, the proposed FSS structure is a good candidate to enhance high-frequency electromagnetic pulse protection of wideband radar systems.

Frequency Selective Surface with Miniaturized Elements Based on Quarter-Mode Substrate Integrated Waveguide Cavity with Two Poles

Bandpass Frequency Selective Surface with Two Sharp Sidebands Based on Shunted Quarter‐mode Substrate Integrated Waveguide Cavities

Wideband and Wide-Angle FSS Using Loop Slotted Hybrid Quarter-Mode Substrate Integrated Cavity With Two Independently Controllable Poles

A Novel Dual-Band Frequency Selective Surface (FSS)

A Novel Frequency Selective Surface with Smaller Size and Wide Band

Compact quasi-elliptic bandpass filter based on folded ridge substrate integrated waveguide (FRSIW)

A Bandpass Frequency Selective Surface With a Low Cross-Polarization Based on Cavities With a Hybrid Boundary

A Novel Miniaturized Multiband Strong Coupled-FSS Structure Insensitive to Almost All Angles and All Polarizations

A Miniaturized Ultrawideband Dual-Bandpass Frequency-Selective Surface With High Selectivity

A Novel Fss Based on Hybrid Boundary Condition Cavity

Design of 2.5-D Miniaturized Frequency Selective Surface with Enhanced Oblique Stability

Design of wideband bandpass frequency selective surface based on the patch resonators and substrate integrated waveguide cavities

A Novel Miniaturized Strong-Coupled FSS Structure with Excellent Angular Stability

A Novel Miniaturized Dual-band Frequency Selective Surface

A Multi-functional Frequency Selective Polarization Converter Based on Substrate Integrated Waveguide Cavities

A Hybrid 2-D–3-D Miniaturized Multiorder Wide Bandpass FSS

Filtenna-Filtenna Design for Broadband and High-Selectivity Frequency Selective Surface

High-Order Wideband Band-Pass Miniaturized Frequency-Selective Surface with Enhanced Equivalent Inductance

A Quad-Band Highly Selective Frequency Selective Surface with Ultra-Wideband Rejection

An Ultraminiaturized Dual-Stopband Frequency Selective Surface for Ultra High Frequency.

A Novel Angularly Stable Wide Passband Frequency Selective Surface