Abstract:This article introduces a hybrid 3-D frequency selective structure (FSS) that offers high stopband suppression and low insertion loss to mitigate pattern degradation resulting from the mutual coupling of co-aperture array antennas. Traditional 2-D FSSs exhibit good passband performance but lack cross-coupling between resonators, making it difficult to achieve strong stopband suppression at a lower frequency. In contrast, traditional 3-D FSSs provide strong stopband suppression, but the vertical structures pose challenges for impedance matching, leading to high passband loss and poor angular stability. The FSS proposed in this article combines the advantages of both 2-D and 3-D FSSs. It introduces transmission zeros by combining a vertical surface with a cross-shaped metal strip on the foundational 2-D passband FSS. This design significantly enhances the stopband suppression capability of the FSS at the frequencies of interest without compromising the low insertion loss performance in the passband. Simulation results indicate that the proposed 3-D FSS achieves a -10 dB stopband within the frequency range of 1.2 to 2.93 GHz, with a stopband suppression of -16 dB at 2.7 GHz. Furthermore, the average insertion loss within the passband frequency range of 3.3-3.8 GHz remains low, staying below 0.23 dB. The FSS's transmission response remains stable under oblique incidences ranging from 0 degrees to 60 degrees. The operating principle of the FSS is elucidated using an equivalent circuit model. A prototype FSS is fabricated and experimentally characterized for validation. The measured results align with the simulated ones, confirming the FSS's high stopband suppression, low insertion loss, and excellent angular stability, making it a viable solution for mitigating pattern degradation in co-aperture array antennas.

A Hybrid 2-D–3-D Miniaturized Multiorder Wide Bandpass FSS

A Novel Dual-Band Frequency Selective Surface (FSS)

Bandpass Frequency Selective Surface with Two Sharp Sidebands Based on Shunted Quarter‐mode Substrate Integrated Waveguide Cavities

Multi-characteristic Integrated Ultra-wideband Frequency Selective Rasorber

A Bandpass Frequency Selective Surface With a Low Cross-Polarization Based on Cavities With a Hybrid Boundary

Filtenna-Filtenna Design for Broadband and High-Selectivity Frequency Selective Surface

A Novel Frequency Selective Surface with Smaller Size and Wide Band

A Novel Fss Based on Hybrid Boundary Condition Cavity

A Hybrid 3-D Frequency Selective Structure Featuring Enhanced Stopband Suppression and Reduced Insertion Loss

A Quad-Band Highly Selective Frequency Selective Surface with Ultra-Wideband Rejection

A Miniaturized Ultrawideband Dual-Bandpass Frequency-Selective Surface With High Selectivity

High-Order Wideband Band-Pass Miniaturized Frequency-Selective Surface with Enhanced Equivalent Inductance

A Novel Angularly Stable Wide Passband Frequency Selective Surface

A 3-D Wide Passband Frequency Selective Surface With Sharp Roll-Off Sidebands and Angular Stability

A Novel Miniaturized Multiband Strong Coupled-FSS Structure Insensitive to Almost All Angles and All Polarizations

Wideband and Wide-Angle FSS Using Loop Slotted Hybrid Quarter-Mode Substrate Integrated Cavity With Two Independently Controllable Poles

A Novel 3-D Frequency Selective Surface With Ultrawide Passband and High Selectivity

A broadband second-order bandpass frequency selective surface for microwave and millimeter wave application

A Modified High-Selective Frequency Selective Surface Designed by Multilevel Green's Function Interpolation Method

Design and analysis of a complementary structure-based high selectivity tri-band frequency selective surface

A Dual-Polarized Bandpass Frequency Selective Surface With Stable Response