Factors and Considerations for Modeling Loss of a GaN-based Inverter
Zhe Yang,Paige Renne Williford,Edward A. Jones,Jianliang Chen,Fei Wang,Sandeep Bala,Jing Xu
DOI: https://doi.org/10.1109/tpel.2020.3012958
IF: 5.967
2021-03-01
IEEE Transactions on Power Electronics
Abstract:The article investigates the impacts of four often-neglected factors on the loss model of a GaN-based full-bridge inverter: parasitic capacitance of the devices, dynamics of junction temperature (T<sub>j</sub>) under time-varying power dissipation (P<sub>loss</sub>), case temperature estimation, and detailed considerations of the passive components. Procedures to calculate the converter loss considering the above factors are proposed and implemented. A 4.5-kW hard-switching inverter prototype using gallium nitrite (GaN) high-electron-mobility transistors is used to experimentally demonstrate the impact of each factor on the converter loss model. It is found that the accuracy of a converter loss model is mainly affected by the passive components at the light load condition, whereas the thermal and loss models of the active components become the major factors as the output power increases. The results show that after considering the above factors, the converter loss discrepancy between calculation and measurement can be reduced from 30.6 W (28%) to 2.5 W (less than 3%) at heavy load (P<sub>o</sub> = 4.5 kW), while at the light load condition (P<sub>o</sub> = 500 W), it is reduced from 3.9 W (28%) to 2.6 W (16%). Furthermore, the difference between simulated and measured case temperature of the GaN devices is within 6 °C.
engineering, electrical & electronic