Abstract:This paper introduces a real field mission profile oriented design tool for the new generation of grid connected PV-inverters applications based on SiC-devices. The proposed design tool consists of a grid connected PV-inverter model, an ElectroThermal model, a converter safe operating area (SOA) model, a mission profile model and an the evaluation block. The PV-system model involves a three level bipolar switch neutral point clamped (3L-BS NPC) inverter connected to the three phase grid through a LCL-filter. Moreover, the SOA model calculates the required converter heatsink thermal impedance Z th_H in order to perform in a safe mode for the whole operating range. Furthermore, the proposed design tool considers the mission profile (the measured solar irradiance and ambient temperature) from the real field where the converter will operate. Thus, a realistic loading of the converter devices is achieved. To consider one year real field measurements of the mission profile, an accurate long term simulation model is developed. The model predicts the junction and case temperature of the converter devices, for three different case scenarios. In the first case, a one year mission profile is used into the model with a sampling rate of five minutes. For the second and third case, a more detailed analysis is performed for one week mission profile (in the wintersummer time) with a sampling rate of 25 s. The simulation results shows the thermal loading distribution among the converter devices (MOSFET, IGBT+FD) in terms of junction (average, peak, ΔT) and case (average) temperature for all three simulation cases. Finally, the evaluation block is used to analyze the results in order to perform a thermal loading-based classification of the converter devices.

Mission Profile Based Sizing of Igbt Chip Area for Pv Inverter Applications

Mission Profile Based Multi-Disciplinary Analysis of Power Modules in Single-Phase Transformerless Photovoltaic Inverters

Real Field Mission Profile Oriented Design of a SiC-based PV-inverter Application

Reliability Assessment of Transformerless PV Inverters Considering Mission Profiles

Prediction of Bond Wire Fatigue of IGBTs in a PV Inverter under a Long-Term Operation

Modeling and Optimization of a Zero-Voltage Switching Inverter for High Efficiency and Miniaturization

Simplified Thermal Modeling for IGBT Modules with Periodic Power Loss Profiles in Modular Multilevel Converters

Improved reliability of single-phase PV inverters by limiting the maximum feed-in power

Impact of Meteorological Variations on the Lifetime of Grid-Connected PV Inverters

Reliability-Driven Assessment of GaN HEMTs and Si IGBTs in 3L-ANPC PV Inverters

Thermal Performance Evaluation of 1500-VDC Photovoltaic Inverters under Constant Power Generation Operation

Long-Term Climate Impact on IGBT Lifetime

Lifetime Evaluation of Three-Level Inverters for 1500-V Photovoltaic Systems

Mission Profile-Oriented Control for Reliability and Lifetime of Photovoltaic Inverters

A Novel Approach to Model and Analyze Uneven Temperature Distribution Among Multichip High-Power Modules and Corresponding Method to Respecify Device SOA

Mission Profile-Based Lifetime Estimation and Its System-Controlled Improvement Method of IGBT Modules for Electric Vehicle Converters

A Variable Switching Frequency Multimode Control Scheme for Single-Phase Grid-Tied Multilevel PV Microinverters

Thermal Performance and Reliability Analysis of Single-Phase Pv Inverters with Reactive Power Injection Outside Feed-In Operating Hours

Impact Of The Thermal-Interface-Material Thickness On Igbt Module Reliability In The Modular Multilevel Converter

Mission-Profile-Based Reliability Evaluation of IGBT Modules for Wide-Speed Range Electric Vehicle Drive Using Fast Multistep Mapping Simulation Strategy

Prediction of bond wire fatigue of IGBTs in a PV inverter under long-term operation