Abstract:Photovoltaic power generation is spreading all around the globe with increasing support from the public and governments. Among the obstacles yet to overcome are higher cell efficiency lower cost, and longer lifetime. The latter is the focus of the research presented here as it provides an alternative photovoltaic ac module inverter with long lifetime. Four commercial inverters analyzed in our laboratory contained electrolytic capacitors whose lifetimes are limited to 12000 hours. In the proposed solution these components are obviated by using an energy control scheme that stores all the energy fluctuation in the dc-link polypropylene capacitor. The energy control strategy has been applied in a prototype power conditioning unit that comprises a phase-shift full-bridge de-ac-de converter connected in series with a current source inverter. The grid current magnitude is controlled using a proportional derivative compensator that maintains the average value of the dc-link capacitor at a voltage level of 475V, while allowing oscillations with a peak value of 125V. Simultaneously, a pulse-width-modulation integrated circuit controller maintains a steady dc voltage at the photovoltaic panel's terminals, hence enhancing the performance of the maximum power point tracking algorithm. The sinusoidal shape of the current injection is attained using current-mode-control. It is shown that the converter operates at high efficiency and that the energy fluctuation is absorbed at the dc-link capacitor. In addition, it is shown that the perturb and observe maximum power point tracking algorithm, performs well over a day of variable irradiance conditions.

Impact of Meteorological Variations on the Lifetime of Grid-Connected PV Inverters

Lifetime Evaluation of Pv Inverters Considering Panel Degradation Rates and Installation Sites

Lifetime Evaluation of Three-Level Inverters for 1500-V Photovoltaic Systems

Reliability Assessment of Transformerless PV Inverters Considering Mission Profiles

Mission Profile Based Multi-Disciplinary Analysis of Power Modules in Single-Phase Transformerless Photovoltaic Inverters

Impact of Reactive Power Injection Outside Feed-In Hours on the Reliability of Photovoltaic Inverters

On the Impacts of PV Array Sizing on the Inverter Reliability and Lifetime

Reliability analysis of single-phase PV inverters with reactive power injection at night considering mission profiles

Mission Profile Based Sizing of Igbt Chip Area for Pv Inverter Applications

The Lifetime Assessment of a Micro-Inverter for PV Applications

Reliability Assessment of PV Inverters with Battery Systems Considering PV Self-Consumption and Battery Sizing

Thermal Performance and Reliability Analysis of Single-Phase Pv Inverters with Reactive Power Injection Outside Feed-In Operating Hours

Lifetime Evaluation of Power Modules for Three-Level 1500-V Photovoltaic Inverters

Improved reliability of single-phase PV inverters by limiting the maximum feed-in power

Thermal Performance Evaluation of 1500-VDC Photovoltaic Inverters under Constant Power Generation Operation

Prediction of Bond Wire Fatigue of IGBTs in a PV Inverter under a Long-Term Operation

Mission Profile-Oriented Control for Reliability and Lifetime of Photovoltaic Inverters

Assessing the impact of PV panel climate-based degradation rates on inverter reliability in grid-connected solar energy systems

Modelling and Analysis of the Reliability of a PhotoVoltaic (PV) Inverter

Energy Control For Long Lifetime Photovoltaic Ac Module Inverter

Lifetime evaluation method of PV inverter considering the influence of fundamental frequency and low frequency junction temperature