Abstract:In order to ease the manufacture process of very large permanent magnet (PM) machines, such as direct drive wind power generators, modularity technique is usually adopted. Although conventional fractional slot PM machines with all teeth wound windings show good performance, the coils located at the end part of each segment could be easily damaged because of being exposed to the air. In addition, the local winding faults could easily proliferate to the whole machine due to the physical touch of adjacent coils. Thus, a novel modular fractional slot PM machine with redundant teeth is proposed in this paper, while three phases within each set of winding are still balanced. The construction of the proposed modular PM machine having 42-slots/32-poles (42S/32P) combination is described in detail as an example, which can be treated as the integration of six 6S/5P segments and a redundant 6S/2P machine. The reason for using 6S/2P machine is to get rid of the undesirable unbalanced magnetic force (UMF), which usually exists in rotating asymmetric machines, such as 3S/2P PM machine. Since the end part of each segment in the proposed modular PM machine can be covered by half redundant tooth during the production, more protection can be provided for coils located in these regions. Furthermore, the separation of six segments can improve the fault-tolerant capability of the machine. The electromagnetic performance predicted by finite-element analysis (FEA) also demonstrates that the proposed modular machine will perform better if dual three-phase winding is adopted. Finally, the experiments on the prototyped machine validate the analysis in the paper.

Cogging Torque Reduction of Multiphase Fractional-slot Concentrated Full-pitch Winding Permanent Magnet Machine Based on Quasi-trapezoidal Permanent Magnet

A Cogging Torque Reduction Method for Surface Mounted Permanent Magnet Motor

Investigation of Short Permanent Magnet and Stator Flux Bridge Effects on Cogging Torque Mitigation in FSPM Machines

Influence of Stator Topologies on Average Torque and Torque Ripple of Fractional-Slot SPM Machines with Fully Closed Slots

Optimal Split Ratio in Fractional-Slot Interior Permanent-Magnet Machines With Non-Overlapping Windings

Superposition Method for Cogging Torque Prediction in Permanent Magnet Machines with Rotor Eccentricity

Novel Modular Fractional Slot Permanent Magnet Machines with Redundant Teeth

Reduction Methods Using Canceling Effect for Cogging Torque in Dual-Stator PM Synchronous Machines

Influence of Stator Asymmetry on Cogging Torque of Permanent Magnet Brushless Machines

Solution of Permanent Magnet Synchronous Motors with Partition between Poles Halbach Magnet

Influence of Pole and Slot Number Combinations on Cogging Torque in Permanent-Magnet Machines with Static and Rotating Eccentricities

Analysis and Reduction of Detent Force in Permanent Magnet Linear Synchronous Motor

Study of magnet shifting for reduction of cogging torque in permanent magnet motors

A Novel Structure of Doubly Salient Permanent Magnet Machine

Design Consideration of Fractional Slot Concentrated Winding Interior Permanent Magnet Synchronous Motor for EV and HEV Applications

The Application of Magnet Structures to Reduce the Cogging Torque Associated with Fractional Slot Number in Permanent Magnet Generators

Design and Analysis of a 500W 120000rpm High-Speed Permanent Magnet Motor

A Novel Structure of Doubly Salient Permanent Magnet Machine in Square Envelope

Research on cogging torque characteristics of permanent magnet synchronous machines with the same number of poles and slots

Cogging Torque Reduction in Permanent Magnet Flux-Switching Machines by Rotor Teeth Axial Pairing

Method for Reducing Cogging Torque Based on Magnet Skewing in Disc-Type Permanent Magnet Motors