Abstract:High-precision microelectromechanical system (MEMS) accelerometers have wide application in the military and civil fields. The closed-loop microaccelerometer interface circuit with switched capacitor topology has a high signal-to-noise ratio, wide bandwidth, good linearity, and easy implementation in complementary metal oxide semiconductor (CMOS) process. Aiming at the urgent need for high-precision MEMS accelerometers in geophones, we carried out relevant research on high-performance closed-loop application specific integrated circuit (ASIC) chips. According to the characteristics of the performance parameters and output signal of MEMS accelerometers used in geophones, a high-precision closed-loop interface ASIC chip based on electrostatic time-multiplexing feedback technology and proportion integration differentiation (PID) feedback control technology was designed and implemented. The interface circuit consisted of a low-noise charge-sensitive amplifier (CSA), a sampling and holding circuit, and a PID feedback circuit. We analyzed and optimized the noise characteristics of the interface circuit and used a capacitance compensation array method to eliminate misalignment of the sensitive element. The correlated double sampling (CDS) technology was used to eliminate low-frequency noise and offset of the interface circuit. The layout design and engineering batch chip were fabricated by a standard 0.35 μm CMOS process. The active area of the chip was 3.2 mm × 3 mm. We tested the performance of the accelerometer system with the following conditions: power dissipation of 7.7 mW with a 5 V power supply and noise density less than 0.5 μg/Hz1/2. The accelerometers had a sensitivity of 1.2 V/g and an input range of ±1.2 g. The nonlinearity was 0.15%, and the bias instability was about 50 μg.

Study Of Closed-Loop High-Resolution Sigma-Delta For A Mems Accelerometer

The Modulation and Demodulation Module of a High Resolution MOEMS Accelerometer

A Low-power High-resolution Band-pass Sigma-delta ADC for Accelerometer Applications

A 0.18 Μm High Resolution Bandpass Delta-Sigma Modulator for Acceleration Transducer Applications

A Low-Power Digital Processing Circuit for Capacitive Accelerometer

Noise Behaviors of a Closed-Loop Micro-Electromechanical System Capacitive Accelerometer

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

Design Of The Closed-Loop Capacitive Micro-Accelerometer Based On Pspice

Comprehensive Optimization of Pid-Type Closed-Loop Mems Accelerometer System

A Novel Digital Closed Loop MEMS Accelerometer Utilizing a Charge Pump.

Modeling and Analysis of a Closed-Loop System for High-Q MEMS Accelerometer Sensor

Genetic Algorithm for Electro-Mechanical Co-Optimization of a MEMS Accelerometer Comprising a Mechanical Motion Pre-Amplifier with a 2Nd-Order Sigma Delta Modulator

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

High Performance Interface Circuit for MEMS Gyroscope

A Novel Mash 2-1 Sigma-Delta A/D Converter with High-To-Low Conversion for Closed-Loop Mems Accelerometer Interface

A Sub-µg Bias-Instability MEMS Oscillating Accelerometer with an Ultra-Low-Noise Read-Out Circuit in CMOS

Research on High-Resolution Miniaturized MEMS Accelerometer Interface ASIC

Elimination of nonlinearity in sigma delta MEMS accelerometer

Overview of Micro-Mechanical Accelerometer Research Based on ΣΔ Modulation TechnologyOverview of Micro-Mechanical Accelerometer Research Based on ΣΔ Modulation Technology

Design And Implementation Of A Novel Cmos-Mems Single Proof-Mass Tri-Axis Accelerometer

A Closed-Loop Mems Accelerometer with Capacitive Sensing Interface Asic