Abstract:This article presents a Ka-band fourth-order slotted spherical resonator waveguide bandpass filter (BPF) with a wide spurious suppression stopband. It uses the first higher-order TM211 mode rather than the fundamental TM101 mode of the spherical resonator in order to obtain a higher unload quality factor (Q u ) for smaller in-band insertion loss, as well as a larger filter volume that gives better tolerance to fabrication errors in high frequency applications. By introducing slots that interrupt surface currents, the fundamental TM101 and two higher spurious modes (TE101 and TM311) can be suppressed without compromising the unloaded quality factor of the TM211 mode. In addition, the filter topology is optimized to further enhance the suppression level of the spurious passbands. AZ-shaped topology has been found effective in decreasing the coupling strength of the spurious TM311 mode. An analysis is performed to demonstrate the better tolerance of the Z-shaped filter over the conventional TM101-mode spherical resonator filter. For verification, a fourth-order slotted spherical resonator waveguide BPF with a center frequency of 31 GHz and bandwidth of 880 MHz is designed and manufactured using a selective laser melting (SLM) 3-D printing process. The measured results show an average in-band insertion loss of 1.53 dB, and a passband return loss better than 13.6 dB. The stopband of the filter is extended up to 40.9 GHz with a rejection level greater than 20 dB.

A Monolithic Stereolithography 3-D Printed Ka-band Spherical Resonator Bandpass Filter

A Novel 76 and 94ghz Dual Band Bandpass Filter Using Multilayer Step Impedance Resonators (Sirs)

A Ku-Band Wideband 3-D Printed Interdigital Bandpass Filter Free Of Post Fabrication Tuning

A 3-D Printed Ku-Band Waveguide Filter Based on Novel Rotary Coupling Structure

3D Printed Bandpass Filters Using Compact High- Q Hemispherical Resonators with Improved Out-of-band Rejection

Compact high-Q hemispherical resonators for 3-D printed bandpass filter applications

A Lightweight 3-D Printed X-Band Bandpass Filter Based on Spherical Dual-Mode Resonators

A 3-D Printed Ka-Band Twisted Waveguide Filter With Filtering And Polarization Rotation

3-D Printed Filter Based on Helical Resonators with Variable Width

A 3D Printed V-Band Twisted Monolithic Waveguide Bandpass Filter

Ceramic Filled Resin Based 3d Printed X-Band Dual-Mode Bandpass Filter with Enhanced Thermal Handling Capability

Lightweight Low-Cost Ka-Band 3-D Printed Slotted Rectangular Waveguide Bandpass Filters

A 3-D Printed Bandpass Filter Using TM₂₁₁-Mode Slotted Spherical Resonators with Enhanced Spurious Suppression

Monolithic 3D Printed Waveguide Filters with Wide Spurious‐free Stopbands Using Dimpled Spherical Resonators

Ka-Band Monolithic Stereolithography 3-D Printed Broadband Passive Waveguide Devices

3-D Printed Slotted Spherical Resonator Bandpass Filters with Spurious Suppression

Design Of Ku-Band Sir Interdigital Bandpass Filter Using Silicon-Based Micromachining Technology

3-D Printed Dual-Band Filter Based on Spherical Dual-Mode Cavity

A 3D Printed Waveguide Hybrid Bandpass Filter Integrated with Twisting and Bending Functionalities

An X-Band Lightweight 3-D Printed Slotted Circular Waveguide Dual-Mode Bandpass Filter

Dual-Band Bandpass Filters Using 3D Printed Dual-Mode Nested Spherical Resonators