Abstract:This article presents a Ka-band fourth-order slotted spherical resonator waveguide bandpass filter (BPF) with a wide spurious suppression stopband. It uses the first higher-order TM211 mode rather than the fundamental TM101 mode of the spherical resonator in order to obtain a higher unload quality factor (Q u ) for smaller in-band insertion loss, as well as a larger filter volume that gives better tolerance to fabrication errors in high frequency applications. By introducing slots that interrupt surface currents, the fundamental TM101 and two higher spurious modes (TE101 and TM311) can be suppressed without compromising the unloaded quality factor of the TM211 mode. In addition, the filter topology is optimized to further enhance the suppression level of the spurious passbands. AZ-shaped topology has been found effective in decreasing the coupling strength of the spurious TM311 mode. An analysis is performed to demonstrate the better tolerance of the Z-shaped filter over the conventional TM101-mode spherical resonator filter. For verification, a fourth-order slotted spherical resonator waveguide BPF with a center frequency of 31 GHz and bandwidth of 880 MHz is designed and manufactured using a selective laser melting (SLM) 3-D printing process. The measured results show an average in-band insertion loss of 1.53 dB, and a passband return loss better than 13.6 dB. The stopband of the filter is extended up to 40.9 GHz with a rejection level greater than 20 dB.

A 3-D Printed Ka-Band Twisted Waveguide Filter With Filtering And Polarization Rotation

3D Printed Waveguide Step-Twist with Bandpass Filtering Functionality

A 3D Printed Waveguide Hybrid Bandpass Filter Integrated with Twisting and Bending Functionalities

A 3-D Printed Ku-Band Waveguide Filter Based on Novel Rotary Coupling Structure

A 3D Printed V-Band Twisted Monolithic Waveguide Bandpass Filter

A 3-D Printed X-Band Waveguide Folded Filter

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

A Monolithic Stereolithography 3-D Printed Ka-band Spherical Resonator Bandpass Filter

3-D-Printed Dual-Band Circularly Polarized Filtering Antenna With Self-Diplexing Property for Millimeter-Wave Applications

An X-Band Lightweight 3-D Printed Slotted Circular Waveguide Dual-Mode Bandpass Filter

A 3-D Printed Circularly Polarized Filtering Antenna

A Ku-Band Wideband 3-D Printed Interdigital Bandpass Filter Free Of Post Fabrication Tuning

A 3D Printed X-Band Waveguide Filter Based on Bowtie-Shaped Resonator

Ka-Band Monolithic Stereolithography 3-D Printed Broadband Passive Waveguide Devices

Lightweight Low-Cost Ka-Band 3-D Printed Slotted Rectangular Waveguide Bandpass Filters

Design of Mm-Wave Filtering Waveguide Twist with Quasi-Elliptic Response and Spurious Suppression Using 3-D Metal Printing

Monolithic 3D Printed Waveguide Filters with Wide Spurious‐free Stopbands Using Dimpled Spherical Resonators

A 3-D Printed Bandpass Filter Using TM₂₁₁-Mode Slotted Spherical Resonators with Enhanced Spurious Suppression

Three-Dimensional Printed, Dual-Band, Dual-Circularly Polarized Antenna Array Using Gap Waveguide Technology

A Monolithically Printed Filtering Waveguide Aperture Antenna

3-D Printed Dual-Band Filter Based on Spherical Dual-Mode Cavity