Abstract:This article presents a Ka-band fourth-order slotted spherical resonator waveguide bandpass filter (BPF) with a wide spurious suppression stopband. It uses the first higher-order TM211 mode rather than the fundamental TM101 mode of the spherical resonator in order to obtain a higher unload quality factor (Q u ) for smaller in-band insertion loss, as well as a larger filter volume that gives better tolerance to fabrication errors in high frequency applications. By introducing slots that interrupt surface currents, the fundamental TM101 and two higher spurious modes (TE101 and TM311) can be suppressed without compromising the unloaded quality factor of the TM211 mode. In addition, the filter topology is optimized to further enhance the suppression level of the spurious passbands. AZ-shaped topology has been found effective in decreasing the coupling strength of the spurious TM311 mode. An analysis is performed to demonstrate the better tolerance of the Z-shaped filter over the conventional TM101-mode spherical resonator filter. For verification, a fourth-order slotted spherical resonator waveguide BPF with a center frequency of 31 GHz and bandwidth of 880 MHz is designed and manufactured using a selective laser melting (SLM) 3-D printing process. The measured results show an average in-band insertion loss of 1.53 dB, and a passband return loss better than 13.6 dB. The stopband of the filter is extended up to 40.9 GHz with a rejection level greater than 20 dB.

An X-Band Lightweight 3-D Printed Slotted Circular Waveguide Dual-Mode Bandpass Filter

Lightweight Low-Cost Ka-Band 3-D Printed Slotted Rectangular Waveguide Bandpass Filters

A Lightweight 3-D Printed X-Band Bandpass Filter Based on Spherical Dual-Mode Resonators

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

A 3D Printed Waveguide Hybrid Bandpass Filter Integrated with Twisting and Bending Functionalities

A 3-D Printed X-Band Waveguide Folded Filter

A 3D Printed V-Band Twisted Monolithic Waveguide Bandpass Filter

Monolithic 3D Printed Waveguide Filters with Wide Spurious‐free Stopbands Using Dimpled Spherical Resonators

A Ku-Band Wideband 3-D Printed Interdigital Bandpass Filter Free Of Post Fabrication Tuning

A 3-D Printed Ku-Band Waveguide Filter Based on Novel Rotary Coupling Structure

Ceramic Filled Resin Based 3d Printed X-Band Dual-Mode Bandpass Filter with Enhanced Thermal Handling Capability

3-D Printed Slotted Spherical Resonator Bandpass Filters with Spurious Suppression

3-D Printed Dual-Band Filter Based on Spherical Dual-Mode Cavity

A 3D Printed X-Band Waveguide Filter Based on Bowtie-Shaped Resonator

3D Printed Bandpass Filters Using Compact High- Q Hemispherical Resonators with Improved Out-of-band Rejection

A 3-D Printed Ka-Band Twisted Waveguide Filter With Filtering And Polarization Rotation

3-D Printed Mm-Wave Filter Using Increased-Height DGS Resonator for Spurious Suppression

A 3-D Printed Bandpass Filter Using TM₂₁₁-Mode Slotted Spherical Resonators with Enhanced Spurious Suppression

Novel microwave/millimeter-wave passive waveguide devices based on 3-D printing techniques

3D Printed Waveguide Step-Twist with Bandpass Filtering Functionality

A Monolithic Stereolithography 3-D Printed Ka-band Spherical Resonator Bandpass Filter