Abstract:Accurate measurements of the radon exhalation rate help identify and evaluate radon risk regions in the environment. Among these measurement methods, the closed-loop method is frequently used. However, traditional experiments are insufficient or cannot analyze the radon migration and exhalation patterns at the gas–solid interface in the accumulation chamber. The CFD-based technique was applied to predict the radon concentration distribution in a limited space, allowing radon accumulation and exhalation inside the chamber intuitively and visually. In this study, three radon exhalation rates were defined, and two structural ventilation tubes were designed for the chamber. The consistency of the simulated results with the variation in the radon exhalation rate in a previous experiment or analytical solution was verified. The effects of the vent tube structure and flow rate on the radon uniformity in the chamber; permeability, insertion depth, and flow rate on the radon exhalation rate and the effective diffusion coefficient on back-diffusion were investigated. Based on the results, increasing the insertion depth from 1 to 5 cm decreased the effective decay constant by 19.55%, whereas the curve-fitted radon exhalation rate decreased (lower than the initial value) as the deviation from the initial value increased by approximately 7%. Increasing the effective diffusion coefficient from 2.77 × 10 −7 to 7.77 × 10 −6 m 2 s −1 made the deviation expand from 2.14 to 15.96%. The conclusion is that an increased insertion depth helps reduce leakage in the chamber, subject to notable back-diffusion, and that the closed-loop method is reasonably used for porous media with a low effective diffusion coefficient in view of the back-diffusion effect. The CFD-based simulation is expected to provide guidance for the optimization of the radon exhalation rate measurement method and, thus, the accurate measurement of the radon exhalation rate.

Screening and analysis of 222Rn concentration data under the simplified correction model for calculating the radon exhalation rate

Novel approaches for accurately measuring radon exhalation rate and mechanism interpreted by numerical simulation

A novel method to simulate radon exhalation rate with a solid Rn-222 source

Estimation and validation of the corrected short-term model for radon exhalation rate on building materials

Numerical simulations for radon migration and exhalation behavior during measuring radon exhalation rate with closed-loop method

Evaluation of accurate measurement methods for radon exhalation rate with advection effect and application in field

Automated release rate inversion and plume bias correction for atmospheric radionuclide leaks: A robust and general remediation to imperfect radionuclide transport modeling

Modeling of Radon Exhalation from Soil Influenced by Environmental Parameters.

Accurate Measurement of the Radon Exhalation Rate of Building Materials Using the Closed Chamber Method

Numerical prediction of 222Rn exhalation from cement–based materials under accelerated carbonation

Theoretical model for calculating and adjusting radon activity concentration in ventilation networks of uranium mines considering pressure drop effect

Estimation of Global Radon Exhalation Rate Distribution

INTRODUCTION AND TESTING OF A SIMPLIFIED METHOD FOR THE EVALUATION OF THE RADON EMANATION

Considerations and Measurements of Radon Exhalation Rate

Corrections to Kusnetz Method for Measurements of Radon Progeny Concentrations in Air

Evaluation and measurement methods for the surface radon exhalation rate of buildings

Feasibility for Mapping Radon Exhalation Rate from Soil in China

Numerical analysis and modeling of two-loop experimental setup for measurements of radon diffusion rate through building and insulation materials

Laboratory study on the relationship between the vertical distribution of radon concentration in soil and the exhalation rate of radon from the soil surface

A universal laboratory method for determining physical parameters of radon migration in dry granulated porous media

Methodology Study on Evaluation of Radon Flux from Soil in China