Abstract:Accurate measurements of the radon exhalation rate help identify and evaluate radon risk regions in the environment. Among these measurement methods, the closed-loop method is frequently used. However, traditional experiments are insufficient or cannot analyze the radon migration and exhalation patterns at the gas–solid interface in the accumulation chamber. The CFD-based technique was applied to predict the radon concentration distribution in a limited space, allowing radon accumulation and exhalation inside the chamber intuitively and visually. In this study, three radon exhalation rates were defined, and two structural ventilation tubes were designed for the chamber. The consistency of the simulated results with the variation in the radon exhalation rate in a previous experiment or analytical solution was verified. The effects of the vent tube structure and flow rate on the radon uniformity in the chamber; permeability, insertion depth, and flow rate on the radon exhalation rate and the effective diffusion coefficient on back-diffusion were investigated. Based on the results, increasing the insertion depth from 1 to 5 cm decreased the effective decay constant by 19.55%, whereas the curve-fitted radon exhalation rate decreased (lower than the initial value) as the deviation from the initial value increased by approximately 7%. Increasing the effective diffusion coefficient from 2.77 × 10 −7 to 7.77 × 10 −6 m 2 s −1 made the deviation expand from 2.14 to 15.96%. The conclusion is that an increased insertion depth helps reduce leakage in the chamber, subject to notable back-diffusion, and that the closed-loop method is reasonably used for porous media with a low effective diffusion coefficient in view of the back-diffusion effect. The CFD-based simulation is expected to provide guidance for the optimization of the radon exhalation rate measurement method and, thus, the accurate measurement of the radon exhalation rate.

Laboratory study on the relationship between the vertical distribution of radon concentration in soil and the exhalation rate of radon from the soil surface

Experimental and theoretical study of radon distribution in soil

Analysis of equivalent thickness of geological media for lab-scale study of radon exhalation

Numerical simulations for radon migration and exhalation behavior during measuring radon exhalation rate with closed-loop method

Radon exhalation behavior and determination of diffusion migration parameters in spherical porous emanation media

The Effect of Some Soil Physical Parameters on Soil Radon Concentration and Radon Exhalation from Soil Surface

A novel method to simulate radon exhalation rate with a solid Rn-222 source

Accurate Measurement of the Radon Exhalation Rate of Building Materials Using the Closed Chamber Method

Modeling of Radon Exhalation from Soil Influenced by Environmental Parameters.

A universal laboratory method for determining physical parameters of radon migration in dry granulated porous media

A simple device to simulate the radon vertical migration in soil

Experimental study on coupling characteristics of radon exhalation from surrounding rock of deep uranium mines

RADON EXHALATION FROM SOIL AND ITS DEPENDENCE FROM ENVIRONMENTAL PARAMETERS

New-designed In-Situ Measurement System for Radon Concentration in Soil Air and Its Application in Vertical Profile Observation

Evaluation and measurement methods for the surface radon exhalation rate of buildings

Continuous Measurement of Radon Exhalation Rate of Soil in Beijing

Novel approaches for accurately measuring radon exhalation rate and mechanism interpreted by numerical simulation

Study on the effect of soil type and pore structure on radon release from soils in coal mine areas

Effect of atmospheric temperature on underground radon: A laboratory experiment

Influence of cracks on open-loop measurement of radon exhalation rate on soil surface

Feasibility for Mapping Radon Exhalation Rate from Soil in China