Abstract:This study presents a new low‐power and low‐phase noise Colpitts quadrature voltage‐controlled oscillator (QVCO). The proposed QVCO contains two differential Colpitts voltage‐controlled oscillators (VCOs) that use gain‐boosting technique to enhance the negative transconductance and relax start‐up condition. Both switching and tail transistors are configured in class‐C to improve impulse sensitivity function and phase noise performance of the circuit via better noise modulation function. In addition, flicker noise would be reduced because of the switched‐biasing mechanism of tail transistors. Phase noise analysis shows that changing the bias voltage of switching as well as tail transistors can improve the phase noise performance of the core VCO with overlap reduction of the transistors active time. Consequently, due to no extra noisy elements for coupling and class‐C biasing of all transistors, low‐phase noise quadrature signals are generated. To verify the performance of the proposed technique, post‐layout simulation is performed in Taiwan Semiconductor Manufacturing Company (TSMC) of 0.18 μm Radio Frequency‐Complementary Metal‐Oxide‐ Semiconductor (RF‐CMOS) process at a supply voltage of 1.2 V. Post‐layout simulation results show that the phase noise of the proposed QVCO is −120.6 dBc/Hz at 1 MHz offset from 5.73 GHz operation frequency. The total power consumption of the QVCO is 3.1 mW and the tuning range is from 5 to 5.73 GHz.

A Low-Voltage High-Swing Colpitts Vco With Inherent Tapped Capacitors Based Dynamic Body Bias Technique

A 40 Nm Cmos V-Band Vco with On-Chip Body Bias Voltage Control Technique

An Improved Low Phase Noise LC-VCO with Wide Frequency Tuning Range Used in CPPLL

A Low Phase Noise VCO with Placement Reordered Cores and High-Q Bond Wire Array Inductors

A 3 GHz Low Power LC VCO with Voltage Boosted Circuit from 0.5 V Supply

Analysis and design of a new low‐phase noise and Gm‐enhanced class‐C quadrature VCO

An 110 GHz CMOS Colpitts VCO based on switched coupled-inductor

A Swing-Enhanced Current-Reuse Class-C VCO with Dynamic Bias Control Circuits

An Ultra-Low-Voltage High-Performance VCO in 0.13 μm CMOS

A HIGH-SWING CLASS-C VCO WITH AMPLITUDE FEEDBACK LOOP FOR LOW PHASE NOISE AND ROBUST START-UP

A 4.4-Ghz 193.2-Db FoM 8-Shaped-inductor Based LC-VCO Using Orthogonal-Coupled Triple-Coil Transformer

A 180 GHz differential Colpitts VCO in 65 nm CMOS

A 3.65-4.10 GHz Class-C VCO with 189.1 Dbc/hz FoM Based on Low Electromagnetic Coupling

A Low-Phase-Noise 1-Ghz Lc Vco Differentially Tuned By Switched Step Capacitors

A 5‐ghz Low‐phase Noise CMOS VCO with Swing Boosting Technique

A Low Noise Self-Mixing-VCO Based on Coupled Class-F<sub>2</sub> Oscillators

A Low Noise Self-Mixing-VCO Based on Coupled Class-F 2 Oscillators

A Low Power CMOS VCO Using Inductive-Biasing with High Performance FoM

Design of a 24GHz low phase-noise,wide tuning-range VCO with optimized switches in capacitor array and bias filtering technique

Low Phase Noise and Linear Gain VCO Using Self-Switched Biasing

A Feedback Class-C VCO with Robust Startup Condition over PVT Variations and Enhanced Oscillation Swing