Abstract:The high-precision integration of three-dimensional (3D) microoptical components into microfluidics in a customizable manner is crucial for optical sensing, fluorescence analysis, and cell detection in optofluidic applications; however, it remains challenging for current microfabrication technologies. This paper reports the in-channel integration of flexible two-dimensional (2D) and 3D polymer microoptical devices into glass microfluidics by developing a novel technique: flat scaffold-supported hybrid femtosecond laser microfabrication (FSS-HFLM). The scaffold with an optimal thickness of 1–5 µm is fabricated on the lower internal surface of a microfluidic channel to improve the integration of high-precision microoptical devices on the scaffold by eliminating any undulated internal channel surface caused by wet etching. As a proof of demonstration, two types of typical microoptical devices, namely, 2D Fresnel zone plates (FZPs) and 3D refractive microlens arrays (MLAs), are integrated. These devices exhibit multicolor focal spots, elongated (>three times) focal length and imaging of the characters ‘RIKEN’ in a liquid channel. The resulting optofluidic chips are further used for coupling-free white-light cell counting with a success rate as high as 93%. An optofluidic system with two MLAs and a W-filter is also designed and fabricated for more advanced cell filtering/counting applications. By fabricating microscale polymer lenses in hollow glass microchannels, scientists realize an optofluidic chip that detects and counts cells. This scheme works by employing a femtosecond laser to ‘grow’ by two-photon polymerization various three-dimensional optical structures, such as microlens arrays, on a flat polymer scaffold on the internal surface of a microfluidic channel. White light is then shone through the lenses and the presence of cells in the optical path is detected by a drop in light transmission. Dong Wu and co-workers from RIKEN’s Laser Technology Laboratory in Japan and Jilin University in China say that this fabrication approach could also prove useful for constructing a variety of active and passive micro-optic devices, such as optical switches, on-chip microlasers and amplifiers for lab-on-a-chip applications.

Quantitative Microfluidic Delivery Based on an Optical Breakdown-Driven Micro-Pump for the Fabrication of Fiber Functional Devices

High-Q, Low-Mode-volume Microsphere-Integrated Fabry–Perot Cavity for Optofluidic Lasing Applications

Fabrication of high-Q microresonators in dielectric materials using a femtosecond laser: Principle and applications

Advancing Integrated Photonics and Microreactor Technologies with Ultrafast Laser Processing

Fabrication of Optical Cavities with Femtosecond Laser Pulses

Microfluidic Pumps with Laser Streaming from Tips of Optical Fibers and Sewing Needles

An Efficient Non-Invasive Method to Fabricate In-Fiber Microcavities Using a Continuous-Wave Laser

Macrodrop‐Impact‐Mediated Fluid Microdispensing

Microfluidics at Fiber Tip for Nanoliter Delivery and Sampling

Laser-driven jetting of nanoscale non-conducting liquid droplets via hollow optical fiber

An Integrated Droplet Manipulation Platform with Photodeformable Microfluidic Channels

Optofluidics in Microstructured Optical Fibers

Laser Nanofabrication: Applications in Micro-Optics, Micro-Electronics, Micromachines, and Microfluidics

Laser-Induced Thermal Bubble-Mixing on A Microfluidic Platform for Lab-On-A-Chip Applications

Femtosecond Laser Rapid Prototyping of Nanoshells and Suspending Components Towards Microfluidic Devices

Optical Manipulation Of Microparticles Using Graded-Index Fiber Taper And Its Microfluidic Sensing Application

Communication—Evaporation Driven Micro/Nanofluidic Pumping Device

Integrative Optofluidic Microcavity with Tubular Channels and Coupled Waveguides Via Two-Photon Polymerization

Integration of Functional Microstructures Inside a Microfluidic Chip by Direct Femtosecond Laser Writing

In-channel Integration of Designable Microoptical Devices Using Flat Scaffold-Supported Femtosecond-Laser Microfabrication for Coupling-Free Optofluidic Cell Counting

A review on optical microfibers in fluidic applications