Abstract:Modern Physics Letters B, Ahead of Print. In this paper, a novel digital closed-loop interface circuit system of MEMS vibrating gyroscope is proposed, which includes driving, detection and quadrature circuits. Because of the high sensitivity and precision of the MEMS gyroscope, the interface circuit system is established under the condition of mode separation. The driving circuit of MEMS gyroscope adopts digital automatic gain control (AGC) to realize self-excitation closed-loop control, which makes the gyroscope system simple in structure and good in robustness. First, the working principle of the gyroscope's sensitive structure is introduced and the system simulation model of the sensitive structure is developed. Second, a [math] ADC and DAC with single-bit output are designed and the feasibility of the driving circuit design is verified by the system-level model. Third, the quadrature closed-loop correction circuit is designed to reduce the coupling of the quadrature component to the gyroscope detection circuit. The simulation results show that the quadrature correction loop can effectively reduce the influence of the quadrature coupling on the detection loop of MEMS gyroscope. Finally, the system-level model of the gyroscope is established by SIMULINK, the overall system performance of the gyroscope is analyzed, and the test system of MEMS gyroscope is built by field-programmable gate array (FPGA) and application specific integrated circuit (ASIC). The experiment verifies the feasibility of the digital interface circuit design, and the zero-bias instability of the gyroscope system is 1.0∘/h.

A High Performance Quartz Vibrating Gyroscope Interface Circuit Driven by Square-Wave

A Quartz Vibrating Gyroscope Interface Circuit Driven by Sine-Wave Based on Nonlinear Multiplier

High Performance Interface Circuit for MEMS Gyroscope

A Sub-0.1°/H Bias-Instability MEMS Gyroscope Using Resonant Constant-Frequency Driving Technique

An Interface Asic Of Quartz Vibratory Gyroscope With 0.8 Degrees/Hour Root Allan Variance

A 0.09°/h Bias-Instability MEMS Gyroscope Working with a Fixed Resonance Frequency

A Closed-Loop Self-Excited Drive Circuit for Quartz Gyroscope

ASIC design of micro-mechanical gyro interface of low temperature drift quartz with temperature compensation

One-time Frequency Sweep to Eliminate IQ Coupling in MEMS Vibratory Gyroscopes

Constant-frequency Oscillation Control for Vibratory Micro-Machined Gyroscopes

A Low-Noise Readout Interface For Silicon Mems Vibratory Gyroscope

A high-performance interface ASIC for quartz vibrating gyroscope

Sine-Wave Exciting Circuit for Quartz Vibrating Gyroscope

An Interface for Low-Q Micromachined Gyroscope

An Interface ASIC for an Atmospheric-Pressure MEMS Gyroscope with PLL-Based Phase Adjustment and SC Amplitude Regulation

Design of an interface circuit system for mode-separation MEMS digital gyroscope

An Interface ASIC Design of MEMS Gyroscope with Analog Closed Loop Driving

A Digital Mems Gyroscope With 40 Degrees/H Instability Variation In-40 Degrees C To 85 Degrees C

A 0.5 Degrees/H Bias Instability 0.067 Degrees/Root H Angle Random Walk Mems Gyroscope With Cmos Readout Circuit

Design and test of the interface of the dual-chip integrated digital silicon gyroscope ASIC

An Interface ASIC for MEMS Vibratory Gyroscopes with Nonlinear Driving Control