Abstract:A high ratio (winding ratio of 1:80) pulse transformer with a modular ferrite core was developed for a repetitive resonant charging system. The magnetic core is constructed from 68 small blocks of ferrites, glued together by epoxy resin. This allows a high degree of freedom in choosing core shape and size. Critical issues related to this modular design are the size tolerance of the individual ferrite blocks, the unavoidable air gap between the blocks, and the saturation of the core. To evaluate the swing of the flux density inside the core during the charging process, an equivalent circuit model was introduced. It was found that when a transformer is used in a resonant charging circuit, the minimal required volume of the magnetic material to keep the core unsaturated depends on the coupling coefficient of the transformer and is independent of the number of turns of the primary winding. Along the flux path, 17 small air gaps are present due to the inevitable joints between the ferrite blocks. The total air gap distance is about 0.67 mm. The primary and secondary windings have 16 turns and 1280 turns, respectively, and the actually obtained ratio is about 1:75.4. A coupling coefficient of 99.6% was obtained. Experimental results are in good agreement with the model, and the modular ferrite core works well. Using this transformer, the high-voltage capacitors can be charged up to more than 70 kV from a low-voltage capacitor with an initial charging voltage of about 965 V. With 26.9 J energy transfer, the increased flux density inside the core was about 0.23 T, and the core remains unsaturated. The energy transfer efficiency from the primary to the secondary was around 92%.

Optimal Design and Implementation of High-Voltage High-Power Silicon Steel Core Medium-Frequency Transformer

Design and Testing of a Medium Frequency Transformer

Modeling and Design of a Medium Frequency Transformer with High Isolation and High Power-Density

Design of Compact Transmission Line Transformer for High Voltage Nanosecond Pulses

A High-Voltage Pulse Transformer with a Modular Ferrite Core.

Design of a High-Voltage-Insulation and High-Efficiency Medium Frequency Transformer

Development of Multi-Domain Design Tool for Medium Voltage High Frequency Power Transformers

Design and optimization of the high frequency transformer for a 800V/1.2MHz SiC LLC resonant converter

Experimental Characterization of Hybrid Temperature and Frequency Effects on the Performance of Transformers on Silicon Substrate

Design and Optimization of a 200-Kw Medium-Frequency Transformer for Medium-Voltage SiC PV Inverters

Prototype design for a high-voltage high-frequency rectifier transformer for high power use

Design method for high-power high-frequency magnetic-resonance air-core transformer

Design Methodology for Inductor-Integrated Litz-Wired High-Power Medium-Frequency Transformer With the Nanocrystalline Core Material for Isolated DC-Link Stage of Solid-State Transformer

Design and Electromagnetic Analysis of Hybrid Megawatt High Temperature Superconducting Transformer

Multi-variable Optimization Methodology for Medium-Frequency High-Power Transformer Design Employing Steepest Descent Method

Design of a 200 kW Medium-Frequency Transformer (MFT) With High Insulation Capability

High Efficiency High Power Density Cellular 1mhz 380V-12V DCX for Future Data Centers

A High Power 200kW Medium Frequency Transformer With Improved Thermal Management

A High Power Density 48V-12V DCX with 3-D PCB Winding Transformer

An Improved Design Procedure for A 10 Khz, 10 Kw Medium-Frequency Transformer Considering Insulation Breakdown Strength and Structure Optimization

Modeling and Design of Insulation Structure for High Power Density Medium Voltage High-Frequency Transformers