Abstract:<p>Wavelength-switchable fiber laser systems have many potential applications. Herein, the use of an erbium-doped fiber laser based on parallel fiber Bragg gratings (FBGs) (ASE: amplified spontaneous emission; BRM: broadband reflection mirror; CCD: charged-coupled device; EDFL: erbium-doped fiber laser; FBG: fiber Bragg gratings; IR: infrared; MZI: Mach–Zehnder interferometer; OSA: optical spectrum analyzer; OC: output coupler; PC: polarization controller; SNR: signal-to-noise ratios; 3D: three-dimensional; wavelength division multiplexing (WDM)) is proposed to achieve C + L band triple-wavelength-switchable laser output at approximately 1.5 μm. In the proposed system configuration, three parallel FBGs with different resonant wavelengths were fabricated using an 800 nm femtosecond pulsed laser. The proposed fiber laser incorporates first-order FBGs with the periods of 538, 542, and 547 nm. The femtosecond laser was propagated through polyimide coating and cladding and was focused onto the fiber core by a 63× oil lens, while FBGs were inscribed with the use of a point-by-point method to generate resonant wavelengths at 1555.3, 1569.2, and 1583.1 nm. When the FBGs were used as wavelength selectors, a lasing threshold of 85 mW was obtained, and switchable lasing with stable single- and dual-wavelength outputs was achieved based on the adjustment of a polarization controller. Concerning the switchable single-wavelength lasing, the signal-to-noise ratio was greater than 37.23 dB, and the 3 dB linewidth was less than 0.09 nm. The respective power fluctuation measurements were less than 0.22 and 0.68 dB for the single- and dual-wavelength lasers at 26 °C over a scan time of 30 min.</p>

Widely Wavelength-Tunable Mid-Infrared Fluoride Fiber Lasers

Direct Generation of Femtosecond Cylindrical Vector Beams from a 2.8 Μm Er:ZBLAN Fiber Laser

Widely tunable single-frequency Er-doped ZBLAN fiber laser with emission from 3.37 to 3.72 µm

Multifrequency Erbium-Doped Fiber Laser Operating at Room Temperature

Efficient and wavelength-tunable mid-infrared fluoride fiber laser modulated by Cs x WO 3 nanocrystals

Fiber-Integrated Reversibly Wavelength-Tunable Nanowire Laser Based on Nanocavity Mode Coupling.

Versatile and widely tunable mid-infrared erbium doped ZBLAN fiber laser

Gain-Switched Er-Doped Fluoride Fiber Laser at ~3.75 μm

Tunable high energy pulse generation in the range of 2.9-3.6 μm enabled by an actively Q switched Er3+/Dy3+ codoped fluoride fiber oscillator

Highly efficient actively Q-switched Er^3+-doped ZBLAN fiber laser operating around 2.8 μm using a La_3Ga_5SiO_14 electro-optical modulator

Wavelength-tunable spatiotemporal mode-locking in a large-mode-area Er:ZBLAN fiber laser at 2.8 µm

Widely Wavelength-Tunable High Power Single-Longitudinal-Mode Fiber Laser in Mid-Infrared Waveband

High-peak-power and wavelength tunable acousto-optic Q-switched Er:ZBLAN fiber laser

Wavelength-switchable erbium-doped fiber laser incorporating fiber Bragg grating array fabricated by infrared femtosecond laser inscription

A Widely Tunable Single-Longitudinal-mode Ytterbium-Doped Fiber Laser Based on Fiber Lyot Filter

Nanosecond Fiber Laser Step-Tunable from 3.87 to 4.5 Μm in HBr-Filled Hollow-Core Silica Fibers

Mid-infrared pulsed Er:ZBLAN fiber laser producing mode-switchable cylindrical vector beams

400 mW narrow-linewidth Tm-doped silica fiber laser output near 1750nm with volume Bragg grating

High-power continuous-wave mid-infrared 2.8 μm Er-doped fiber lasers: A review

Efficient three-level continuous-wave and GHz passively mode-locked laser by a Nd3+-doped silicate glass single mode fiber