Abstract:Organic fouling and inorganic scaling are the main hurdles for efficient operation of reverse osmosis (RO) technology in a wide range of applications. This study demonstrates dual-functionality surface modification of thin-film composite (TFC) RO membranes to simultaneously impart anti-scaling and anti-fouling properties. Two different grafting approaches were adapted to functionalize the membrane surface with sulfonic groups: (i) non-specific grafting of vinyl sulfonic acid (VSA) via redox radical initiation polymerization and (ii) covalent bonding of hydroxylamide-O-sulfonic acid (HOSA) to the native carboxylic groups of the polyamide layer via carbodiimide mediated reaction. Both approaches to graft sulfonic groups were effective in increasing surface wettability and negative charge density of the TFC-RO membranes without significant alteration of water and salt permeabilities. Importantly, we verified through surface elemental analysis that covalently bound HOSA effectively covers the native carboxylic groups of the PA layer. Both the VSA and HOSA membranes exhibited lower flux decline during silica scaling and organic (alginate) fouling relative to the control unmodified membrane, demonstrating the unique versatility of sulfonic groups to endow the TFC-RO membranes with dual functionality to resist scaling and fouling. In particular, the HOSA membrane showed excellent physical cleaning efficiencies with water flux recoveries of 92.5 +/- 1.0% and 88.4 +/- 6.4% for silica scaling and alginate fouling, respectively. Additional results from silica nucleation experiments and atomic force measurements provided insights into the mechanisms of improved resistance to silica scaling and organic fouling imparted by the surface-functionalized sulfonic groups. Our study highlights the promise of controlled functionalization of sulfonic groups on the polyamide layer of TFC membranes to enhance the applications of RO technology in treatment and reuse of waters with high scaling and fouling potential. (C) 2020 Elsevier Ltd. All rights reserved.

Mitigating Silica Fouling and Improving PPCP Removal by Modified NF90 Using In Situ Radical Graft Polymerization

Novel composite nanofiltration membranes containing zwitterions with high permeate flux and improved anti-fouling performance

Enhancing membrane separation performance in the conditions of different water electrical conductivity and fouling types via surface grafting modification of a nanofiltration membrane, NF90

In-situ radical graft modification of NF270 to improve membrane separation: Effects of water salinity and fouling types

Preparation and Characterization of an Amphiphilic Polyamide Nanofiltration Membrane with Improved Antifouling Properties by Two-Step Surface Modification Method

Anti-Fouling Performance of Mixed Matrix PVDF Membranes with Mono-Hydroxyl Poly(dimethylsiloxane) (PDMS-OH) Grafted Silica Nanoparticles

In Situ Chemical Modification with Zwitterionic Copolymers of Nanofiltration Membranes: Cure for the Trade-Off between Filtration and Antifouling Performance

Preparation of polysulfone/sulfonated polysulfone-SiO 2 nanofiltration membrane and its performance characterization

Enhanced Antifouling Capability of In Situ- Grown Hydrophilic-Hydrophobic Nanodomains on Membrane Surface in the Ultralow Pressurized Ultrafiltration Process

Polyoxometalates decoration combining with solvent activation for enhanced separation performance of nanofiltration membrane

Surface modification of nanofiltration membrane using polyoxometalates for improved separation and antifouling performance

Facile synthesis of nanofiltration membrane with asymmetric selectivity towards enhanced water recovery for groundwater remediation

Modification of polysulfone ultrafiltration membrane by sequential deposition of cross-linked poly(vinyl alcohol) (PVA) and sodium carboxymethyl cellulose (CMCNa) for nanofiltration

Performance enhancement of nanofiltration membranes via surface modification with a novel acylation reagent

Surface Functionalization of Reverse Osmosis Membranes with Sulfonic Groups for Simultaneous Mitigation of Silica Scaling and Organic Fouling

Nanofiltration membrane fabrication by the introduction of polyhedral oligomeric silsesquioxane nanoparticles: Feasibility evaluation and the mechanisms for breaking “trade-off” effect

In-situ Interfacial Polymerization of Polyamide TFN Membranes by Adding a Diamino-Silane Coupling Agent: Toward Enhanced Desalination Performance

Molecular Design of the Polyamide Layer Structure of Nanofiltration Membranes by Sacrificing Hydrolyzable Groups Toward Enhanced Separation Performance.

Conductive nanofiltration membranes via in situ PEDOT-polymerization for electro-assisted membrane fouling mitigation

Modulating interfacial polymerization via 1-methylimidazole as reactive additive for nanofiltration membrane with high-performance

Effect of Varying Piperazine Concentration and Post-Modification on Prepared Nanofiltration Membranes in Selectively Rejecting Organic Micropollutants and Salts