Abstract:The enhancement in selectivity of nanofiltration (NF) membranes is of great significance for extending the application areas and improving the process economy, especially for the separation of monovalent/divalent ions. The characteristics of moderately increased pore size, fewer nonselective defects and a more uniform structure are conducive to NF membrane exhibiting higher rejection of divalent ions but lower rejection of monovalent ions. Nonylphenol polyoxyethylene ether (NP-10) was introduced in interfacial polymerization process in this study to optimize the microstructure and surface properties of polyamide (PA) layer to manufacture highly selective NF membranes. The hydrophobic benzene ring and aliphatic chain in NP-10 could form a local space that restricted the interfacial polymerization reaction on the side of the oil phase, thereby appropriately increasing the pore size of the PA layer. It was advantageous to the permeation of water molecules and monovalent ions with a smaller radius. The long hydrophilic oxyethylene group as a guide could facilitate the uniform diffusion of the monomer to the water/hexane interface. NP-10 as an amphiphilic substance would form a self-assembled network at the water/hexane interface, which was expected to optimize the distribution of aqueous amine monomers at the phase interface. Meanwhile, introducing NP-10 can form a stable interface and reduce the interface disturbance, thus inhibiting the formation of non-selective macropores (or “defects”) in PA layer, which could improve the separation selectivity of monovalent/divalent ions. In addition, the hydrophilicity and electronegativity were also enhanced. The results showed that the MWCO of NF membrane increased from 210.1 Da (TFC-0) to 269.6 Da (TFC-0.25), and the average pore radius increased from 0.248 nm to 0.276 nm. The water flux of optimized membrane was doubled compared to the control membrane. Most important, the optimized exhibited higher rejection of divalent Na2SO4 (from 98.07% to 99.43%), and meanwhile lower rejection of monovalent NaCl (from 54.07% to 27.52%). NaCl/Na2SO4 separation factor reached up to 130.53, which was about four times of TFC-0 membrane.

Modulating interfacial polymerization via 1-methylimidazole as reactive additive for nanofiltration membrane with high-performance

Preparation of Hybrid Nanofiltration Membranes Based on Schiff Base Reaction for Hard Water Softening

Phytic acid and ferric chloride compound additives-regulated interfacial polymerization for high-performance nanofiltration membrane

Amphiphilic Interlayer Regulated Interfacial Polymerization for Constructing Polyamide Nanofiltration Membranes with High Perm-Selectivity of Mono-/Divalent Salts

Enhancing the desalination performance of polyamide nanofiltration membranes via in-situ incorporation of zwitterionic nanohydrogel

Molecular Design of the Polyamide Layer Structure of Nanofiltration Membranes by Sacrificing Hydrolyzable Groups Toward Enhanced Separation Performance.

Polyamide nanofiltration membrane with high mono/divalent salt selectivity via pre-diffusion interfacial polymerization

Tailoring Properties and Performance of Polyamide Composite Nanofiltration Membranes by LiCl-added Interfacial Polymerization

Novel Poly(piperazinamide)/poly(m-phenylene isophthalamide) composite nanofiltration membrane with polydopamine coated silica as an interlayer for the splendid performance

Exploitation of Amine Groups Cooped up in Polyamide Nanofiltration Membranes to Achieve High Rejection of Micropollutants and High Permeance of Divalent Cations

Simultaneously Modulating Nanofiltration Membrane Surface Charges and Pore Size in Pursuit of Effective Cation Separation Via a Bi-Functional Monomers-Interfered IP Reaction

Preparation of highly selective nanofiltration membranes by moderately increasing pore size and optimizing microstructure of polyamide layer

Enhancing Ion Separation Efficiency: Janus Charged Nanofiltration Membrane Fabricated via Polyethyleneimine-Manipulated Interfacial Polymerization

Nanofiltration membranes with enhanced performance by constructing an interlayer integrated with dextran nanoparticles and polyethyleneimine coating

Hydrogel-regulated interfacial polymerization: A gateway to effective nanostructure tuning of polyamide nanofiltration membranes

Water recovery from the high salinity brine: Effect of the interlayer structure in the polyamide nanofiltration membrane

A Nanofiltration Membrane Preparation Process Based on Polyethyleneimine Diffusion Modulation and Surface Modification

Aminoimidazole ionic liquid (IL) embellishment of nanofiltration (NF) membrane to simultaneously enhance heavy metals rejection and permeability

Enhancing the perm-selectivity of thin-film nanocomposite membranes intercalated with cyclodextrin-chelated Metal-Organic Framework via modulated interfacial polymerization

Alginate Hydrogel Assisted Controllable Interfacial Polymerization for High-Performance Nanofiltration Membranes

Designing bioinspired nanofiltration membrane for enhanced water permeance and efficient ion sieving