Abstract:In this work, hydrophilic polyacrylamide (PAM)-grafted ZnO nanoparticles (ZnO-g-PAM NPs) were prepared and embedded into the polyamide (PA) rejection layer of a thin-film nanocomposite (TFN) membrane to improve the FO performance and perm-selectivity, and antifouling properties. ZnO-g-PAM nanofiller was prepared via atom transfer radical polymerization (ATRP) technique to enhance the nanoparticle hydrophilicity and high dispersibility in aqueous media. The obtained hybrid nanofiller participates in the advantageous of both ZnO and PAM brushes presents a uniform dispersion of ZnO in the PA structure of the ZnO-g-PAM-modified TFN membranes. To enhance the water flux and antifouling properties, different amounts (200, 400, and 600 ppm) of ZnO-g-PAM nanofiller was dispersed in the aqueous phase of the IP process. The effect of ZnO-g-PAM concentration on the hydrophilicity, morphology, and roughness of PA thin layer and FO performance (water flux, reverse salt flux, and membrane selectivity) of the TFN membranes were investigated. In addition, the antifouling tendency and intrinsic properties of the TFN membranes were evaluated in cross-section FO and dead-end RO systems, respectively. The effects of ZnO-g-PAM nanofiller on the IP process cause changes in surface morphology, thickness, and chemical composition of PA layer, improving the antifouling properties. As a results, the fabricated TFN-ZP 400 sample was confirmed to has an optimal water flux (20.5 LMH), compared to TFC (12.2 LMH) and other TFN membranes. Meanwhile, salt reverse flux (2.5 gMH) was maintained at a minimum level. Also, the high hydrophilicity of ZnO-g-PAM nanofiller in the PA structure leads to the hydration layer formation on the ZnO-g-PAM-modified PA layer, which minimize the fouling tendency. Therefore, the present study is the first time to consider the implementation of ZnO-g-PAM onto TFN-FO membranes.

Surface modification of nanofiltration membrane using polyoxometalates for improved separation and antifouling performance

Influence of polyvinyl alcohol on the surface morphology, separation and anti-fouling performance of the composite polyamide nanofiltration membranes

Polyoxometalates decoration combining with solvent activation for enhanced separation performance of nanofiltration membrane

Improving the Performance of Polyamide Reverse Osmosis Membrane by Incorporation of Modified Multi-Walled Carbon Nanotubes

Preparation and Characterization of an Amphiphilic Polyamide Nanofiltration Membrane with Improved Antifouling Properties by Two-Step Surface Modification Method

Nanofiltration membrane fabrication by the introduction of polyhedral oligomeric silsesquioxane nanoparticles: Feasibility evaluation and the mechanisms for breaking “trade-off” effect

Rapid, Massive, and Green Synthesis of Polyoxometalate-Based Metal–Organic Frameworks to Fabricate POMOF/PAN Nanofiber Membranes for Selective Filtration of Cationic Dyes

Porous Organic Polymer Embedded Thin-Film Nanocomposite Membranes for Enhanced Nanofiltration Performance

A novel ZnO nanoparticle blended polyvinylidene fluoride membrane for anti-irreversible fouling

Mitigating Silica Fouling and Improving PPCP Removal by Modified NF90 Using In Situ Radical Graft Polymerization

Preparation, Characterization and Performance of Poly(m-Phenylene Isophthalamide)/organically Modified Montmorillonite Nanocomposite Membranes in Removal of Perfluorooctane Sulfonate.

Modification of PVDF membrane by post-modified NH2-MIL-88B(Fe) showing improved permeability and oil/water separation performance

Polyacrylamide-grafted zinc oxide (ZnO-g-PAM) nanoparticles as a promising nanofiller for thin-film nanocomposite forward osmosis membranes

In-situ formation of epoxy derived polyethylene glycol crosslinking network on polyamide nanofiltration membrane with enhanced antifouling performance

Modification of polysulfone ultrafiltration membrane by sequential deposition of cross-linked poly(vinyl alcohol) (PVA) and sodium carboxymethyl cellulose (CMCNa) for nanofiltration

A nanofiltration membrane with outstanding antifouling ability: Exploring the structure-property-performance relationship

Engineering polyamide nanofiltration membrane with bifunctional terpolymer brushes for antifouling and antimicrobial properties

Zwitterionic metal-organic frameworks modified polyamide membranes with enhanced water flux and antifouling capacity

Surface modification of polyamide reverse osmosis membrane with organic-inorganic hybrid material for antifouling

Efficient removal of perfluorinated compounds with the polyamide nanofiltration membrane and membrane fouling resistance analysis

Property Characterization and Mechanism Analysis of Polyoxometalates-Functionalized PVDF Membranes by Electrochemical Impedance Spectroscopy