Abstract:It is of great significance for a voltage source converter (VSC)-based multiterminal dc (MTdc) grid to isolate the dc fault lines within several milliseconds after dc fault. Existing protection schemes and fault analysis methods are mainly based on the numerical simulations, which lack the theoretical analysis. In this paper, a high-frequency (HF) equivalent model of VSC-based MTdc grid that is utilized for initial dc fault current calculation is first proposed. In the proposed model, the parallel connected capacitors of VSCs are regarded as short-circuited, and the initial fault current calculation of the fault dc line and the healthy dc line can be reduced as a simplified RL and RLC circuit. Accordingly, a novel dc fault detection method for VSC-based MTdc system is further proposed. In the proposed approach, the primary detection utilizes the transient average value of line current and the fault dc line can be identified quickly with only one-end information. In addition, the errors between the transient fault current calculation based on the distributed parameter line model and the lumped parameter line model are also evaluated. Numerous simulation studies carried out in PSCAD/EMTdc have demonstrated that the proposed HF equivalent model can be utilized for initial dc fault analysis of VSC-MTdc system and the proposed protection scheme is effective under different fault locations and high fault resistances. Compared with the traditional protection schemes based on rate of change of current, the proposed one requires relatively low sampling frequency and low computation burden, and has high fault resistance tolerance ability and high robustness with respect to the missing data.

Fault control and line protection strategy for LVDC microgrids based on modified high-frequency-link DC solid state transformer

A Modified DC Fault Protection Scheme for Multi-Terminal HVDC Grid Based on Fault Current Limiters

A DC Solid-State Transformer with DC Fault Ride-Through Capability

Collaborative Control Strategy of Power Electronic Transformer and Fault Current Limiter in DC Microgrid

Fast protection strategy for DC transmission lines of MMC-based MT-HVDC grid

Single‐phase Grouding Fault Analysis and Control Scheme of Transformerless Flexible Multistate Switch

Modulation and Control of a New Alternate Arm Multilevel Converter for High-Voltage Direct Current System with Direct Current Fault Ride-Through Capability

A Local Protection and Local Action Strategy of DC Grid Fault Protection

Single-Ended Protection Scheme for VSC-Based DC Microgrid Lines

Control of a Hybrid Modular Solid-State Transformer for Uninterrupted Power Supply under MVdc Short-Circuit Fault

Fault Distance Estimation-Based Protection Scheme for DC Microgrids

DC Fault Analysis and Protection Design in Shunt Modular Multilevel-Based MTDC System

A high-speed protection scheme for the DC transmission line of a MMC-HVDC grid

Novel fault isolation scheme under protection failure in MVDC distribution networks without DC circuit breakers

DC Fault Detection in MTDC Systems Based on Transient High Frequency of Current

Active Control of DC Fault Currents in DC Solid-State Transformers During Ride-Through Operation of Multi-Terminal HVDC Systems

DC Fault Detection in Meshed MTdc Systems Based on Transient Average Value of Current

Protection of Nonpermanent Faults on DC Overhead Lines in MMC-Based HVDC Systems

Novel Transient Current-Based Protection Scheme For Dc Line Faults In Uhvdc System

DC Fault Analysis and Transient Average Current Based Fault Detection for Radial MTDC System

Transient-Voltage-Based Protection Scheme for DC Line Faults in the Multiterminal VSC-HVDC System