Abstract:In this research, Ti-6Al-4 V alloy thin strip with ultra-high tensile strength and good ductility combination was successfully prepared by a new high-efficiency short-flow on-line warm rolling processing method. To explore the intricate relationships between microstructure evolution, mechanical characteristics, and the deformation mechanism during on-line warm rolling of the Ti-6Al-4 V alloy, various analytical methods were employed, including OM, SEM, XRD, EPMA, EBSD, and TEM. When the rolling reduction escalated from a Warm Rolling (WR) rate of 70–90%, there was a concurrent increase in both the alloy's strength and ductility. In numerical terms, the ultimate tensile strength, yield strength, and total elongation rose from 1241 MPa, 1117 MPa, and 5.3% respectively at WR-70%, to 1366 MPa, 1214 MPa, and 8.2% at WR-90%. At WR-90%, the high strength of the resulting Ti-6Al-4 V alloy thin strip is ensured through a distinct combination of material adaptations. These include grain refinement, high-density dislocation accumulation, and the presence of both partial fine recrystallization and ultrafine grains. The initiation of the pronounced basal slip system {0001}< 11–20 > coupled with the pyramidal system {11−22}< 11–2–3 > plays a pivotal role in retaining ductility even under conditions of elevated strength. The amalgamation of grain refinement, dense dislocation accumulation, and the juxtaposition of partial fine recrystallization with ultrafine grains, in tandem with the prevailing basal slip system {0001}< 11–20 > and the active pyramidal system {11−22}< 11–2–3 > , ensures the preservation of commendable ductility while simultaneously achieving high strength. This successful creation of the high-performance Ti-6Al-4 V alloy thin strip provides crucial parameters and theoretical guidance for the industrial application of the hydraulic tension on-line warm rolling method for titanium alloys and other similarly difficult-to-deform metals.

RETRACTED: Effect of Electroplastic Rolling on Deformability, Mechanical Property and Microstructure Evolution of Ti–6Al–4V Alloy Strip

The Influence of Warm Rolling Reduction on Microstructure Evolution, Tensile Deformation Mechanism and Mechanical Properties of an Fe-30Mn-4Si-2Al TRIP/TWIP Steel

Effect of Electroplastic Rolling on the Ductility and Superelasticity of Tini Shape Memory Alloy

Effect of Electroplastic Rolling on Deformability and Oxidation of NiTiNb Shape Memory Alloy

Enhancement of Ductility, Weakening of Anisotropy Behavior and Local Recrystallization in Cold-Rolled Ti-6Al-4V Alloy Strips by High-Density Electropulsing Treatment

Effect of Direct Rolling Process on Microstructure and Mechanical Properties of the Electron Beam Cold Hearth Melting Ti-6Al-4V Alloy

RETRACTED: Effect of Electropulsing Treatment on Microstructure and Mechanical Properties of Cold-Rolled Pure Titanium Strips

RETRACTED: Influence of Electropulsing Globularization on the Microstructure and Mechanical Properties of Ti–6Al–4V Alloy Strip with Lamellar Microstructure

Recent Developments in Plastic Deformation Behavior of Titanium and Its Alloys During the Rolling Process: A Review

Effect of pack rolling on microstructures and tensile properties of as-forged Ti-44Al-6V-3Nb-0.3Y alloy

Recrystallization Behavior and Mechanical Properties of Az31b Alloy During the Hot-Rolling Process

Transverse texture weakening and anisotropy improvement of Ti-6Al-4V alloy sheet via asymmetric rolling and static recrystallization annealing

Superplastic Deformation Behaviors and Power Dissipation Rate for Fine-Grained Ti-6Al-4V Titanium Alloy Processed by Direct Rolling

Study on Microstructure Evolution, Mechanical Properties and Deformation Mechanism of Ti-6Al-4V Alloy by Hydraulic Tension On-Line Warm Rolling

The Improved Plasticity of NiTi Alloy Via Electropulsing in Rolling

Microstructure Evolution and Mechanical Properties of a Hot-Rolled Ti Alloy

Retracted: Effects of High-Energy Electro-Pulsing Treatment on Microstructure, Mechanical Properties and Corrosion Behavior of Ti-6al-4v Alloy (retracted Article. See Vol.90, Pg.781, 2018)

Microstructure evolution and recrystallization of Ti6246 alloy in hot‐rolling and annealing processes

Effect of Recovering Damage and Improving Microstructure in the Titanium Alloy Strip under High-Energy Electropulses

RETRACTED: Microstructure, Properties and Temperature Evolution of Electro-Pulsing Treated Functionally Graded Ti–6Al–4V Alloy Strip

Change in Microstructures and Mechanical Properties of Biomedical Ti-Nb-Ta-Zr System Alloy through Cross-Rolling