Abstract:The Cornell Electron-positron Storage Ring (CESR) has been converted from a High Energy Physics electron-positron collider to operate as a dedicated synchrotron light source for the Cornell High Energy Synchrotron Source (CHESS) and to conduct accelerator physics research as a test accelerator, capable of studying topics relevant to future damping rings, colliders and light sources. Some of the specific topics that were targeted for the initial phase of operation of the storage ring in this mode for CESR as a Test Accelerator (CesrTA) included 1) tuning techniques to produce low emittance beams, 2) the study of electron cloud development in a storage ring and 3) intra-beam scattering effects. The complete conversion of CESR to CesrTA occurred over a several year period, described elsewhere. In addition to instrumentation for the storage ring, which was created for CesrTA, existing instrumentation was modified to facilitate the entire range of investigations to support these studies. Procedures were developed, often requiring coordinated measurements among different instruments. This paper describes the instruments utilized for the study of beam dynamics during the operation of CesrTA. The treatment of these instruments will remain fairly general in this paper as it focusses on an overview of the instruments themselves. Their interaction and inter-relationships during sequences of observations is found in a companion paper describing the associated measurement techniques. More detailed descriptions and detailed operational performance for some of the instrumentation may be found elsewhere and these will be referenced in the related sections of this paper.

Measurement and modeling of electron cloud in a field free environment using retarding field analyzers

Comparison of electron cloud mitigating coatings using retarding field analyzers

Measurement and modeling of electron-cloud-induced betatron tune shifts at the Cornell Electron-positron Storage Ring test accelerator

Measurement of Electron Trapping in the Cornell Electron Storage Ring

Report on Instrumentation and Methods for In-Situ Measurements of the Secondary Electron Yield in an Accelerator Environment

Emulsion Cloud Chamber technique to measure the fragmentation of a high-energy carbon beam

Instrumentation for the Study of Low Emittance Tuning and Beam Dynamics at CESR

Measurement and Compensation of Horizontal Crabbing at the Cornell Electron Storage Ring Test Accelerator

Shielded button electrodes for time-resolved measurements of electron cloud buildup

Experimental Analysis of A New Retarding Field Energy Analyzer

Electron Cloud Measurements in Fermilab Booster

Measurement of Charge State Distributions using a Scintillation Screen

CESR Test Accelerator

The Conversion of CESR to Operate as the Test Accelerator, CesrTA, Part 4: Superconducting Wiggler Diagnostics

A Proximal Retarding Field Analyzer for Scanning Probe Energy Loss Spectroscopy

Measurement of the energy distribution of electrons escaping confinement from an electron cyclotron resonance ion source

Retarding Field Energy Analyzer for High Energy Pulsed Electron Beam Measurements

Retarding Field Analyzer for the EAST Plasma Boundary

Measurement of Stark-split beam and carbon charge exchange emissions for simultaneous B-field and temperature/rotation analysis at DIII-D

Measurements of the energy distribution of electrons lost from the minimum B-field-The effect of instabilities and two-frequency heating

Time Resolved Measurement of Electron Cloud Densities from Dispersion of Transverse Electric Pulses