Abstract:The leakage rates of bolted flanged connections change with service time due to the gasket contact stress relaxation and degradation of gasket material. The nonuniform distribution of gasket contact stress has significant influence on the leakage behavior of the connections. In order to predict the time-correlated leakage rates accurately, both appropriate approaches to dealing with the gasket residual contact stress and a corresponding time-correlated leakage model of sealing elements are needed. In this paper, an analytical model has been developed to determine the maximum contact stress at gasket outer diameter in consideration of creeps of flanges, bolts and gasket coupled to the axial deformation compatibility equation. The analysis was verified against the finite element numerical simulation considering the nonlinear behavior of gasket and material creep. The analytical results of the maximum contact stress of gasket and its change over time compared well with those obtained by finite element method. A time-correlated leakage model of nonmetallic gasket sealing connections based on the porous medium theory was established, in which the effects of the gasket material degradation and contact stress relaxation on the sealing performance were taken into consideration. Furthermore, a leakage rate prediction method was proposed. Some long-term sealing performance tests were performed on two types of gaskets to obtain the coefficients in the leakage model. The leakage rate prediction method proposed in this paper was also validated against the experimental data presented by other researchers, and the errors between the predicted values and the experimental results were within 18%. [DOI: 10.1115/1.4004818]

Research on Leakage Prediction Calculation Method for Static Seal Ring in Underground Equipments

Prediction of Leakage Based on the Change of the Surface Topography

Research on Dynamic Simulation Method of Leakage Prediction for Hydraulic System

Analytical and Experimental Method of Thermal Load Estimation for Seals in Transmission of Vehicle

A Leakage Model of Contact Mechanical Seals Based on the Fractal Theory of Porous Medium

Leakage prediction approach and influencing factor analysis from seal test

A Percolation Method of Leakage Calculation and Prediction Within the Mechanical Seal Interface

A Non-Ideal Geometry Based Prediction Approach of Fitting Performance and Leakage Characteristic of Precision Couplings.

A Numerical Analysis Method of Hydraulic Seals for Downhole Equipments

Study on Leakage Rate of Rubber Sealing Structures Based on Percolation Theory

Prediction of Seal Wear with Thermal-Structural Coupled Finite Element Method

Study on Time-Correlated Leakage Predication Model of Nonmetallic Gaskets

A Leakage Rate Model for Metal-to-Metal Seals Based on the Fractal Theory of Porous Medium

Design method and research of high temperature gas floating ring seal with slightly variable gap

Research on Prediction Model of Interlayer Leakage in Separate Injection Wells in Offshore Oilfields

Prediction of Time-Correlated Leakage Rates of Bolted Flanged Connections by Considering the Maximum Gasket Contact Stress

An Approach to Calculate Leak Channels and Leak Rates Between Metallic Sealing Surfaces

A New Leakage Measurement Method for Damaged Seal Material

Research on internal flow field analysis and power loss modeling of the expansion seal ring

3D Simulation and Leakage Detection Technique for Deep Foundation Pits Based on Electric Field

Time-dependent leakage rate prediction method for bolted flange connection based on equivalent stress-temperature