Abstract:The prediction of micro milling forces in difficult-to-machine materials such as titanium alloys, which have small dimensions and arc-thin-walled features, has become a major challenge due to coupling effects of multi-physics fields. This problem has become a key bottleneck in the development of aerospace, biomedical, and other fields. This study focuses on titanium alloy arc-thin-walled parts and develops a micro milling force prediction model that considers the dual flexible coupling deformation and geometric features of arc-thin-walled parts in the process of micro milling. Firstly, a micro milling force theoretical model is established based on the instantaneous cutter position angle and instantaneous uncut chip thickness. Secondly, the detailed geometric analysis is conducted to calculate the entry and exit angles and instantaneous uncut chip thickness considering the micro milling path characteristics. Subsequently, the Euler beam and Timoshenko beam are assumed based on the characteristics of the cutter and workpiece structure, as well as the force situations. The deflection deformation values are calculated by solving unit stiffness matrix. The coupling deflection deformation is introduced into the micro milling force prediction model by an iterative algorithm, and this improves the instantaneous uncut chip thickness model. Finally, the micro milling force data is obtained through arc micro milling experiments, and the coefficient of micro milling force is identified. The reliability and accuracy of the micro milling force prediction model are verified through experiments, of which the prediction error range is 9.005~12.427%. The proposed model and methodology have practical significance and provide a basis for optimizing micro milling processes and promoting the development of related fields.

Modeling and Experimental Study on the Force of Micro-Milling Titanium Alloy Based on Tool Runout

Experimental Research of Milling Force and Surface Quality for TC4 Titanium Alloy of Micro-Milling

Theoretical Modeling and Experimental Study of Micro Milling Force Based on Tool Wear Mapping

Numerical Simulation Study on Milling Force for Aerospace Aluminum Alloy

Micro-milling force modeling with tool wear and runout effect by spatial analytic geometry

A Comprehensive Micro-Milling Force Model for a Low-Stiffness Machining System

The Modelling and Analysis of Micro-Milling Forces for Fabricating Thin-Walled Micro-Parts Considering Machining Dynamics

Tool Run-Out in Micro-Milling: Development of an Analytical Model Based on Cutting Force Signal Analysis

Investigation on dynamic tool deflection and runout-dependent analysis of the micro-milling process

Tool Runout Effects on Wear and Mechanics Behavior in Microend Milling

Progress of Cutting Force Modelling in Micromilling

Modeling of cutting force in micro-milling considering asymmetric tool wear

An analytical micro-milling force model based on the specific cutting pressure-feed dependence, in presence of ploughing and tool run-out effects

Modelling and Experimental Analysis of the Effects of Tool Wear, Minimum Chip Thickness and Micro Tool Geometry on the Surface Roughness in Micro-End-Milling

Generic Cutting Force Modeling with Comprehensively Considering Tool Edge Radius, Tool Flank Wear and Tool Runout in Micro-End Milling

Analysis and modeling of cutting force considering the tool runout effect in longitudinal-torsional ultrasonic vibration-assisted 5 axis ball end milling

Investigation of the tool flank wear influence on cutter-workpiece engagement and cutting force in micro milling processes

Generic Cutting Force Modeling Comprehensively Considering Tool Edge Radius, Tool Flank Wear and Tool Runout in Micro-End Milling

An improved time-varying stability analysis of micro milling considering tool wear

Micro-Milling Tool Wear Monitoring via Nonlinear Cutting Force Model

Micro milling force prediction of arc thin-walled parts considering dual flexibility coupling deformation