Abstract:Mechanical property testing, spectral analysis, phase analysis, scattering evaluation and mechanism research of CFRP under various temperature and moisture composite environments. Temperature and moisture are important environmental conditions governing the usage of carbon fiber‐reinforced plastics (CFRP). In this study, tensile, compression, and shear tests of woven CFRP composites were conducted in four composite environments: cold‐temperature dry state, room‐temperature dry state, elevated‐temperature dry state, and elevated‐temperature wet state. Fourier transform infrared (FTIR) spectroscopy was used to analyze the molecular composition and structure under these environments. The fracture morphology was also analyzed using scanning electron microscopy (SEM) to understand the deterioration mechanism of the material properties at the macro and micro scales. Finally, a two‐parameter Weibull statistical model was used to evaluate the scattering of the composites. The results demonstrate that the tensile, compressive, and shear properties of the material decrease under harsh conditions, and the degradation effect on the ultimate strength is much greater than that of the modulus. Cold‐temperature dry and elevated‐temperature wet conditions are particularly severe. Composite environments significantly affect the macroscopic failure process and ultimate failure mode of materials. In general, the temperature and humidity of the matrix system acts at the core of the deterioration mechanism of composites, affecting the properties of the fiber/matrix and orthogonal woven fiber interfaces, and eventually resulting in a loss of their constitutive strength and bearing capacity. The theoretical ultimate strength were consistent with the experimental values. Highlights Comprehensive mechanical property testing in multiple composite environments. Degradation mechanisms were revealed from multiscale morphology analysis. Scattering of composites were evaluated using statistical analyses. Cold temperature dry and elevated temperature wet were the worst states. Deterioration effect of environment on matrix and interface is the core failure mechanism.

Experimental Study on the Bending Properties and Failure Mechanism of 3D MWK Composites at Elevated Temperatures

High-Strain-Rate Compression Behavior and Failure Mechanism of 3d Mwk Carbon/Epoxy Composites

Experimental investigation on mechanical response and failure analysis of 3D multi-axial warp knitted hybrid composites

On the tensile properties and failure mechanisms of 3D six-directional braided composites at elevated temperatures

Elevated temperature effect on tension fatigue behavior and failure mechanism of carbon/epoxy 3D angle-interlock woven composites

Experimental Study on the Mechanical Behavior and Failure Mechanism of 3d MWK Carbon/epoxy Composites under Quasi-Static Loading

Transverse bending fatigue behaviors and failure mechanisms of 3D five-directional braided composites at different temperatures

Research of Extreme Service Temperature on the Bending Behavior of Composites for Wind Turbine Blades

The three-point bending responses of carbon fiber composite sandwich beams with Y-frame cores at high and low temperatures

In‐plane compressive properties and failure mechanisms of modified three‐dimensional multi‐axial warp knitted fabrics reinforced composites at different temperatures

The temperature effect on the inter-laminar shear properties and failure mechanism of 3D orthogonal woven composites

Transverse impacts‐induced deformation and damage of 3D angle‐interlock woven composites at elevated temperatures

Split Hopkinson pressure bar testing of 3D multi-axial warp knitted carbon/epoxy composites

Strain Rate and Temperature Effect on Mechanical Properties and Failure of 3D Needle-Punched Carbon/Carbon Composites under Dynamic Loading

Experimental study on the fabrication, high-temperature properties and failure analysis of 3D seven-directional braided composites under compression

A hierarchical multiscale model for the elastic-plastic damage behavior of 3D braided composites at high temperature

Effect of temperature and moisture composite environments on the mechanical properties and mechanisms of woven carbon fiber composites

Uniaxial Tensile Behavior, Flexural Properties, Empirical Calculation and Microstructure of Multi-Scale Fiber Reinforced Cement-Based Material at Elevated Temperature

Experimental and numerical study of in-plane compressive properties and failure of 3D six-directional braided composites with large braiding angle

Longitudinal compression fatigue properties of 3D five-directional braided composites at different temperatures

Effect of temperature on bending behavior of woven fabric-reinforced PPS-based composites