Abstract:Optical dissolved oxygen (DO) concentration measurement based on phase fluorometric theory is one of the most promising DO concentration measurement methods with advantages of insensitivity to the solution, short response time, and satisfying maintainability. However, most phase fluorometric DO concentration measurement systems have limitations such as strong dependence with the chemiluminescent films, low level integration and large noise interference. In this paper, a fully integrated lock-in based phase fluorometric DO sensor interface is proposed with a wide range tunable excitation frequency to be compatible with various chemiluminescent films. The lock-in technique is adopted to improve the sensitivity with large background noise. The proposed interface chip consists of driver for excitation light, transimpedance amplifier (TIA) to read out the weak current of the optical detector, and lock-in amplifier (LIA) for phase-shift detection. A tunable sinusoidal current generator (SCG) based on digital recursive oscillator (RDO) is adopted to generate excitation signal, meeting the requirements of different chemiluminescent films, while a counter-based orthogonal signals generator (OSG) is applied to generate orthogonal demodulating signals. The frequency error between the demodulating signals and excitation signal, which would cause phase-shift detection error, is cancelled by digital calibration method, which relaxes the challenge to match the demodulation signals with the tunable excitation signal. The TIA with DC cancellation is utilized to suppress the DC current of the photodiode (PD) and thus to improve the accuracy of phase-shift detection. The customized interface chip is implemented using a 0.18 μm CMOS process with a core area of 660 μm* 464 μm. The test results show that the developed system has an accuracy of 0.06 degrees and a precision of 0.2 degrees in terms of the excitation frequency range from 4 kHz to 150 kHz.

A portable analog lock-in amplifier for accurate phase measurement and application in high-precision optical oxygen concentration detection

Lock-In Based Phase Fluorometric Dissolved Oxygen Sensor Interface with 4 Khz – 150 Khz Tunable Excitation Frequency and Frequency Error Calibration

Practical system for phase noise measurement of optoelectronic oscillators

Design of Phase-Shift Signal Generator with High Precision Used for Particulate Detection

Ultra-precision angle sensor with a mode-locked laser source

A New Phase Noise Detection Method

High sensitivity microwave phase noise analyzer based on a phase locked optoelectronic oscillator.

A Digital Optical Phase-Locked Loop For Diode Lasers Based On Field Programmable Gate Array

Frequency Programmable Lock-In Amplification Circuit For High Resolution Measurement Of Liquid Electrical Conductivity

Frequency Programmable Lock-in Amplification Circuit for the Measurement of Liquid Low Electrical Conductivity

Research and Implementation of the Key Technology of Digital Lock-in Amplifier

A wide range oxygen sensing strategy with the collaboration of multiple phosphorescence probes

Low-power Lock-in Amplifier for Complex Impedance Measurement

Design of High Frequency Lock-in Amplifier Applied in R-MOG

A High-Accuracy Lock-In Transceiver For Speed Over 8000-R/Min Contactless Eddy-Current Angular Position Sensors

Comparison and Optimization of Phase Locked Loop and Injection Locking Techniques for Optoelectronic Oscillators

A robust phase-locking strategy for optimal applications of various optical feedback cavity-enhanced spectroscopies in harsh environments

Design of Dissolved Oxygen Detecting System Based on Fluorescence Lifetime Method

A Digital Phase Lock Loop for an External Cavity Diode Laser

Development of a Stable Oxygen Sensor Using a 761 nm DFB Laser and Multi-Pass Absorption Spectroscopy for Field Measurements

A Background-Subtraction Strategy Leads to Ratiometric Sensing of Oxygen Without Recalibration