Abstract:Optical dissolved oxygen (DO) concentration measurement based on phase fluorometric theory is one of the most promising DO concentration measurement methods with advantages of insensitivity to the solution, short response time, and satisfying maintainability. However, most phase fluorometric DO concentration measurement systems have limitations such as strong dependence with the chemiluminescent films, low level integration and large noise interference. In this paper, a fully integrated lock-in based phase fluorometric DO sensor interface is proposed with a wide range tunable excitation frequency to be compatible with various chemiluminescent films. The lock-in technique is adopted to improve the sensitivity with large background noise. The proposed interface chip consists of driver for excitation light, transimpedance amplifier (TIA) to read out the weak current of the optical detector, and lock-in amplifier (LIA) for phase-shift detection. A tunable sinusoidal current generator (SCG) based on digital recursive oscillator (RDO) is adopted to generate excitation signal, meeting the requirements of different chemiluminescent films, while a counter-based orthogonal signals generator (OSG) is applied to generate orthogonal demodulating signals. The frequency error between the demodulating signals and excitation signal, which would cause phase-shift detection error, is cancelled by digital calibration method, which relaxes the challenge to match the demodulation signals with the tunable excitation signal. The TIA with DC cancellation is utilized to suppress the DC current of the photodiode (PD) and thus to improve the accuracy of phase-shift detection. The customized interface chip is implemented using a 0.18 μm CMOS process with a core area of 660 μm* 464 μm. The test results show that the developed system has an accuracy of 0.06 degrees and a precision of 0.2 degrees in terms of the excitation frequency range from 4 kHz to 150 kHz.

Design of Dissolved Oxygen Detecting System Based on Fluorescence Lifetime Method

An in Situ Dissolved Oxygen Monitoring System Based on Fluorescence Quenching Phase Detection

Detection Method of Dissolved Oxygen Concentration in Water Based on Time-Domain Fluorescence Lifetime

Study on factors enhancing photobleaching effect of fluorescent dye

Development and Application of Dissolved Oxygen Analyzer Based on Fluorescence Quenching Principle

Oxygen Sensitive Polymeric Nanocapsules for Optical Dissolved Oxygen Sensors

Phase-Locking Detection Technique of Fluorescence Lifetime

Lock-In Based Phase Fluorometric Dissolved Oxygen Sensor Interface with 4 Khz – 150 Khz Tunable Excitation Frequency and Frequency Error Calibration

Fluorescence Detection Method of Dissolved Oxygen Based on Fiber

Review of Dissolved Oxygen Detection Technology: From Laboratory Analysis to Online Intelligent Detection

Dissolved Oxygen and Ph Detection System Based on the Fluorescence Characteristics of Coumarin-Modified CdSe Quantum Dots

Research of an Underwater Optical Analytical Instrument to Detemined DO Concentration on Line

Oxygen concentration detection system based on TDLAS and online elimination of background noise

Development of a portable laser-induced fluorescence system used for in situ measurements of dissolved organic matter

Ratiometric Optical Fiber Dissolved Oxygen Sensor Based on Fluorescence Quenching Principle

Sensitive Detection of Oxygen Using a Diffused Integrating Cavity As a Gas Absorption Cell

Real-time in-situ Simultaneous Monitoring of Dissolved Oxygen and Materials Movements at a Vicinity of Micrometers from an Aquatic Plant by Combining Deflection of a Probe Beam and Fluorescence Quenching

Research on a small-scale drinking water quality detection system based on detection of laser-induced fluorescence

High-performance dissolved oxygen sensors based on platinum(II) porphyrin embedded in polystyrene beads

Design of In-Situ Detecting System for Amount of Marine Microorganism

System for accurately controlling dissolved oxygen content in water and use thereof