Abstract:Optical dissolved oxygen (DO) concentration measurement based on phase fluorometric theory is one of the most promising DO concentration measurement methods with advantages of insensitivity to the solution, short response time, and satisfying maintainability. However, most phase fluorometric DO concentration measurement systems have limitations such as strong dependence with the chemiluminescent films, low level integration and large noise interference. In this paper, a fully integrated lock-in based phase fluorometric DO sensor interface is proposed with a wide range tunable excitation frequency to be compatible with various chemiluminescent films. The lock-in technique is adopted to improve the sensitivity with large background noise. The proposed interface chip consists of driver for excitation light, transimpedance amplifier (TIA) to read out the weak current of the optical detector, and lock-in amplifier (LIA) for phase-shift detection. A tunable sinusoidal current generator (SCG) based on digital recursive oscillator (RDO) is adopted to generate excitation signal, meeting the requirements of different chemiluminescent films, while a counter-based orthogonal signals generator (OSG) is applied to generate orthogonal demodulating signals. The frequency error between the demodulating signals and excitation signal, which would cause phase-shift detection error, is cancelled by digital calibration method, which relaxes the challenge to match the demodulation signals with the tunable excitation signal. The TIA with DC cancellation is utilized to suppress the DC current of the photodiode (PD) and thus to improve the accuracy of phase-shift detection. The customized interface chip is implemented using a 0.18 μm CMOS process with a core area of 660 μm* 464 μm. The test results show that the developed system has an accuracy of 0.06 degrees and a precision of 0.2 degrees in terms of the excitation frequency range from 4 kHz to 150 kHz.

Frequency Programmable Lock-In Amplification Circuit For High Resolution Measurement Of Liquid Electrical Conductivity

Frequency Programmable Lock-in Amplification Circuit for the Measurement of Liquid Low Electrical Conductivity

A Low Excitation Working Frequency Capacitively Coupled Contactless Conductivity Detection (C4D) Sensor for Microfluidic Devices

Two New Measurement Techniques of Liquid Conductivity

Design Of A Low Power Wide-Band High Resolution Programmable Frequency Divider

A Two-Step Time-to-Digital Converter with 5.6ps Resolution and 1 - 4255μs Measurement Range

Research and Implementation of the Key Technology of Digital Lock-in Amplifier

High-accuracy Control System Based on DDS for Laser Frequency and Its Applications

Low-power Lock-in Amplifier for Complex Impedance Measurement

A Digital and Compact High-Precision Locking System for Pulse Laser Repetition Frequency

Design of Phase-Shift Signal Generator with High Precision Used for Particulate Detection

A digital, constant-frequency pulsed phase-locked-loop instrument for real-time, absolute ultrasonic phase measurements

A Novel Digital&#x0A0;&#x0A0;Lock-in Amplifier with Dual Channels

A Method for Improving the Laser Diffraction Efficiency During Frequency Shifting

Lock-In Based Phase Fluorometric Dissolved Oxygen Sensor Interface with 4 Khz – 150 Khz Tunable Excitation Frequency and Frequency Error Calibration

Feedback lock-in: A versatile multi-terminal measurement system for electrical transport devices

A Hybrid Analog/Digital Phase-Locked Loop for Frequency Mode Non-contact Scanning Probe Microscopy

Low Power Measurement of Low Resistances by Simple Lock-In Amplifier

Dual-phase digital lock-in implementation based on Nyquist rate and sampling subtraction

A Low-Jitter Harmonic-Free All-Digital Delay-Locked Loop for Multi-Channel Vernier TDC

A Reconfigurable Tri-Mode Frequency-Locked Loop Readout Circuit for Biosensor Interfaces