Abstract:Due to the fluctuation and non-uniform distribution of temperature within the core structure of high-temperature gas-cooled reactors (HTGRs), the thermal expansion behavior of graphite materials plays an important role in the design of graphite components, especially of large-scale components. In the present paper, in order to investigate the influence of stress levels on the coefficient of thermal expansion (CTE) of IG-110 graphite, the strain gauge method was used to measure the CTE on the cylindrical specimens under a series of loads applied using a universal tensile testing machine. In addition, a more precise measurement using a thermal dilatometer was employed to validate the tests using the strain gauge method. A good agreement has been obtained between the experimental results using these two methods. The results show that when the specimens were under compressive loads, the CTE along the loading direction of the specimens increased and that along the perpendicular direction decreased, with more changes in the former. The absolute changes of the CTE in the two directions increased with increasing applied load. When graphite specimens were subjected to a compressive load of 40MPa, the axial CTE of specimens sectioned along the radial direction of the graphite brick as it is installed in the core structure increased from 4.13×10−6 to 5.35×10−6K−1, while the axial CTE of specimens sectioned along the vertical direction increased from 3.97×10−6 to 5.58×10−6K−1. Moreover, the residual change of the CTE, which was caused by the permanent residual strain after unloading, was observed. The change of the CTE with stress levels should be considered in the stress analysis and life prediction of the nuclear graphite components.

Effects of FLiNaK Infiltration on Thermal Expansion Behavior of Graphite

High temperature in-situ synchrotron-based XRD study on the crystal structure evolution of C/C composite impregnated by FLiNaK molten salt

The Compatibility of Nuclear Graphite with Molten Salt in the Molten Salt Reactor

The effect of molten FLiNaK salt infiltration on the strength of graphite

Infiltration of Graphite by Molten 2lif–bef 2 Salt

Effect of Tensile Strength on the Microstructure of Graphite Impregnated with Salt Revealed by in Situ Synchrotron-Based Two-Dimensional X-ray Diffraction

Effects of Impurities and Additives on Interactions of Nuclear-Grade Graphite with Molten LiF-NaF-KF

Protection of nuclear graphite toward liquid fluoride salt by isotropic pyrolytic carbon coating

Microstructure evolution of IG-110 nuclear graphite with salt infiltration revealed by in-situ tensile synchrotron-XRD

Porosity properties and molten salt impregnation characteristics of nuclear graphites

Improving Molten Fluoride Salt and Xe-135 Barrier Property of Nuclear Graphite by Phenolic Resin Impregnation Process

Improvement of Stacking Order in Graphite by Molten Fluoride Salt Infiltration

Alkali-fluoride-salt-accelerated Oxidation Behavior of Graphite under Air Atmosphere

The Effect of Stress Levels on the Coefficient of Thermal Expansion of a Fine-Grained Isotropic Nuclear Graphite

The Infiltration Behavior and Chemical Compatibility of Molten Lead-Bismuth Eutectic in Nuclear Graphite at Elevated Temperature

Preparation of Binderless Nanopore-Isotropic Graphite for Inhibiting the Liquid Fluoride Salt and Xe135 Penetration for Molten Salt Nuclear Reactor

Characterization of molten 2LiF–BeF 2 salt impregnated into graphite matrix of fuel elements for thorium molten salt reactor

Microstructure and Molten Salt Impregnation Characteristics of A Micro-Fine Grain Graphite for Use in Molten Salt Reactors

SiC coating: An alternative for the protection of nuclear graphite from liquid fluoride salt

[ICAPP 2023] thermal dehydration tests of FLiNaK salt suitable for thermal-hydraulic experiments

Corrosion of 316L Stainless Steel Alloy and Hastelloy-N Superalloy in Molten Eutectic LiF-NaF-KF Salt and Interaction with Graphite