Abstract:We demonstrate a 2.08 μm all-polarization-maintaining (PM) holmium-doped fiber oscillator using a hybrid mode-locking technique with nonlinear polarization evolution (NPE) and a semiconductor saturable absorber mirror (SESAM). This oscillator features a linear structure with dual output ports. It initiates stable single-pulse mode-locking at a fundamental repetition rate of 57.86 MHz, requiring only about 400 mW of pump power. However, removing SESAM requires increasing the pump power to about 2.2 W—about a 5.8-fold increase—to initiate mode-locking, which starts in a multi-pulse state. Additionally, the oscillator can operate in two distinct states by adjusting the phase bias, ensuring that the main output port delivers high-quality, soliton-like femtosecond pulses. The other port, known as the rejection port, emits lower-quality pulses with different spectral and temporal characteristics. However, in one state, the pulse quality at the rejection port is significantly enhanced, approaching the high quality of the main output port. Theoretical analysis indicates that the pulse quality at the rejection port strongly relies on the energy distribution between the two orthogonally polarized pulses in the PM fiber. Another advantage of the hybrid mode-locking configuration is that it allows a pump power tuning range to maintain single-pulse operation as high as 220 mW. It is ∼4 times higher than that of the NPE-only configuration which is about 60 mW. These results indicate that oscillators using hybrid mode-locking exhibit much greater flexibility and reliability than those using PM-NPE alone. The hybrid mode-locking technique shows potential in addressing the self-starting challenges inherent in PM-NPE lasers, thereby advancing their applicability in practical scenarios.

Performance enhancement via XPM suppression of a linear all-PM mode-locked fiber oscillator

Performance Enhancement via XPM Suppression in a Linear all-PM NPE Mode-locked Fiber Oscillator

Enhanced performance of all-PM Ho-doped fiber oscillator using NPE-SESAM hybrid mode-locking

All-Polarization-Maintaining Linear Cavity Fiber Lasers Mode-Locked by Nonlinear Polarization Evolution in Stretched Pulse Regime

Observation of Mode-Locking Dynamics of a Fiber Laser Incorporating a Photoelastic Modulator (PEM)

Robust mode-locking in a hybrid ultrafast laser based on nonlinear multimodal interference

A Robust and Novel Linear Fiber Laser Mode-locked by Nonlinear Polarization Evolution in All-polarization-maintaining Fibers

All-polarization-maintaining NALM mode-locked Er/Yb-doped large-mode-area fiber oscillator

All-polarization-maintaining linear fiber laser mode-locked by nonlinear polarization evolution with phase bias

All-polarization-maintaining divided pulse fiber oscillator mode-locked with the optical Kerr effect

1015-1080 Nm Tunable Polarization-Maintaining Dissipative Soliton Mode-Locked Fiber Laser

Large-mode-area soliton fiber oscillator mode-locked using NPE in an all-PM self-stabilized interferometer

140 kHz, 1.2 ps pulses from an all-PM Yb-doped fiber master oscillator-power amplifier

Low-repetition-rate, high pulse energy all-polarization-maintaining Er-doped fiber laser mode-locked with a nonlinear amplifying loop mirror

Machine-learning Iterative Optimization for All Polarization-Maintaining Linear Cavity Er:fiber Laser.

Linear Polarization-maintaining Fiber Laser Mode-locked by Nonlinear Polarization Evolution

Intracavity Filtering Effect in a Dual-Output Linear-Cavity All-Pm Fiber Laser Mode-Locked by NPE.

Dispersion management of a nonlinear amplifying loop mirror-based erbium-doped fiber laser

Low-repetition-rate, all-polarization-maintaining Yb-doped fiber laser mode-locked by a semiconductor saturable absorber

Nonlinear spectral compression in high-power narrow-linewidth polarization maintaining fiber amplifiers for SBS suppression

115-Mhz Linear NPE Fiber Laser Using All Polarization-Maintaining Fibers