Abstract:We demonstrate a 2.08 μm all-polarization-maintaining (PM) holmium-doped fiber oscillator using a hybrid mode-locking technique with nonlinear polarization evolution (NPE) and a semiconductor saturable absorber mirror (SESAM). This oscillator features a linear structure with dual output ports. It initiates stable single-pulse mode-locking at a fundamental repetition rate of 57.86 MHz, requiring only about 400 mW of pump power. However, removing SESAM requires increasing the pump power to about 2.2 W—about a 5.8-fold increase—to initiate mode-locking, which starts in a multi-pulse state. Additionally, the oscillator can operate in two distinct states by adjusting the phase bias, ensuring that the main output port delivers high-quality, soliton-like femtosecond pulses. The other port, known as the rejection port, emits lower-quality pulses with different spectral and temporal characteristics. However, in one state, the pulse quality at the rejection port is significantly enhanced, approaching the high quality of the main output port. Theoretical analysis indicates that the pulse quality at the rejection port strongly relies on the energy distribution between the two orthogonally polarized pulses in the PM fiber. Another advantage of the hybrid mode-locking configuration is that it allows a pump power tuning range to maintain single-pulse operation as high as 220 mW. It is ∼4 times higher than that of the NPE-only configuration which is about 60 mW. These results indicate that oscillators using hybrid mode-locking exhibit much greater flexibility and reliability than those using PM-NPE alone. The hybrid mode-locking technique shows potential in addressing the self-starting challenges inherent in PM-NPE lasers, thereby advancing their applicability in practical scenarios.

Sources, Detectors and Receivers Semiconductor, Superconductor and Other Direct Detection of THz Signals with an NbN Superconducting Tunnel Junction

Nonlinearity Optimization of Dissipative-Soliton Fiber Laser for Generation of Pulses with 350 Kw Peak Power

Risk factors for endophthalmitis following cataract surgery: a retrospective case-control study.

Performance Enhancement via XPM Suppression in a Linear all-PM NPE Mode-locked Fiber Oscillator

Figure-8 mode-locked Yb-doped fibre oscillator with a nonlinear amplifying loop mirror and power amplification

Conformation of uncomplexed natural antamanide crystallized from CH(3)CN/H(2)O.

Enhanced performance of all-PM Ho-doped fiber oscillator using NPE-SESAM hybrid mode-locking

980nm all-fiber NPR mode-locking Yb-doped phosphate fiber oscillator and its amplifier

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

1015-1080 Nm Tunable Polarization-Maintaining Dissipative Soliton Mode-Locked Fiber Laser

Semi-linear all-polarization-maintaining Yb-doped fiber laser oscillator manifesting dual operation regime at net anomalous dispersion

Low-repetition-rate, all-polarization-maintaining Yb-doped fiber laser mode-locked by a semiconductor saturable absorber

140 kHz, 1.2 ps pulses from an all-PM Yb-doped fiber master oscillator-power amplifier

Core-pumped mode-locked ytterbium-doped fiber laser operating around 980 nm

Energy Scalability of the Dissipative Soliton in an All-Normal-dispersion Fiber Laser with Nonlinear Amplifying Loop Mirror

27nJ, 114fs Pulses From an Environmentally Stable All-Normal All-PM Yb-Doped Fiber Laser Mode-Locked With a Nonlinear Amplifying Loop Mirror

Highly Efficient Rectangular Pulse Emission in a Mode-Locked Fiber Laser

Spectrally tunable phase-biased NALM mode-locked Yb:fiber laser with nJ-level pulse energy

Single mode output by controlling the spatiotemporal nonlinearities in mode-locked femtosecond multimode fiber lasers

All-PM Yb-doped mode-locked fiber laser with high single pulse energy and high repetition frequency

Wavelength and repetition rate tunable high peak power dissipative soliton resonance in an all polarization maintaining Yb-doped fiber laser