Dispersion management of a nonlinear amplifying loop mirror-based erbium-doped fiber laser

Zbigniew Łaszczych,Grzegorz Soboń

DOI: https://doi.org/10.1364/OE.416107

IF: 3.8

2021-01-15

Optics Express

Abstract:Zbigniew Łaszczych, Grzegorz Soboń We report an investigation of dispersion management of an all-polarization-maintaining Er-fiber oscillator mode-locked via a nonlinear ... [Opt. Express 29, 2690-2702 (2021)]

optics

What problem does this paper attempt to address?

Broadband Noise-Like Pulse Generation at 1 Μm Via Dispersion and Nonlinearity Management.

Ji Zhou,Yuhang Li,Yaoguang Ma,Qing Yang,Qiang Liu

DOI: https://doi.org/10.1364/ol.420002

2021-01-01

Abstract:We demonstrate that optical microfibers integrated in Yb-doped fiber lasers boost broadband noise-like pulse (NLP) generation via dispersion and nonlinearity management, with an optical spectrum spanning from below 1000 nm to beyond 1600 nm when the diameter of the optical microfiber is 1.2 µm. Numerical simulations show that dispersion and nonlinearity management provided by the optical microfiber is responsible for the broadband NLP generation. Furthermore, it is shown experimentally that dispersion and nonlinearity management via optical microfibers can also bring the highest optical rogue waves along with the broadest optical spectrum.
Dispersive Mirrors for High Third-Order Dispersion Compensation in Femtosecond Amplification Fiber Laser System

H. L. Niu,W. D. Shen,C. S. Li,Y. G. Zhang,C. Xie,P. Yu,W. J. Yuan,B. W. Liu,M. L. Hu,Q. Y. Wang,X. Liu

DOI: https://doi.org/10.1007/s00340-012-5059-9

2012-01-01

Abstract:The dispersive mirrors with a third order dispersion (TOD) of about −10000 fs3 at the wavelength of 1040 nm and a compensation bandwidth of 20 nm are designed and fabricated with ion beam sputtering (IBS) technique. A good agreement between the measured and calculated group delay dispersion (GDD) and TOD of the mirror is achieved. These mirrors are employed in a Yb-doped femtosecond nonlinear amplification fiber laser system to compensate the residual TOD in the system. We show that after TOD compensation, the system outputs 44 fs laser pulses with little wing at 26.6 W output average power and 531 nJ pulse energy, corresponding to 10.8 MW peak power.
Vector-dispersion Compensation and Pulse Pedestal Cancellation in a Femtosecond Nonlinear Amplification Fiber Laser System.

Chen Xie,Bowen Liu,Hailiang Niu,Youjian Song,Yi Li,Minglie Hu,Yueguang Zhang,Weidong Shen,Xu Liu,Chingyue Wang

DOI: https://doi.org/10.1364/ol.36.004149

2011-01-01

Abstract:We report on a femtosecond nonlinear amplification fiber laser system using a vector-dispersion compressor, which consists of a transmission grating pair and multipass cell based Gires-Tournois interferometer mirrors. The mirror is designed with nearly zero group-delay dispersion and large negative third-order dispersion. As a result, the third-order dispersion of the compressor can be adjusted independently to compensate the nonlinear phase shift of amplified pulses to reduce the pulse pedestal. With this scheme, the system outputs 44 fs laser pulses with little wing at 26.6W output average power and 531 nJ pulse energy, corresponding to 10.8MW peak power. (C) 2011 Optical Society of America
High-dispersive Mirror for Pulse Stretcher in Femtosecond Fiber Laser Amplification System

Wenjia Yuan,Weidong Shen,Chen Xie,Chenying Yang,Yueguang Zhang

DOI: https://doi.org/10.1088/1674-1056/ac5e9a

2022-01-01

Chinese Physics B

Abstract:We present a high-dispersive multilayer mirror for pulse stretching in a femtosecond fiber laser amplification system.The designed mirror contains 54 layers with a total physical thickness of 7.3 μm, which can provide a positive group delay dispersion（GDD） of 600 fs2and a high reflectance over 99.9% from 1010 to 1070 nm. The samples were prepared by dual ion beam sputtering. The measured transmittance matches well with the theoretical result. The GDD characteristics of samples were tested by home-made white light interferometer. The measured GDD is higher than the design results,an average GDD of +722 fs2from 1010 nm to 1070 nm. The mirrors were employed in a Yb-doped large-mode-area photonic crystal fiber amplification system. An input pulse compressed by the gratings with autocorrelation function of83 fs is obtained with a stretched FWHM of 1.29 ps after 28 bounces between the dispersive mirrors. The results show that the multilayer dispersive mirror could be an effective and promising technique for pulse stretching in femtosecond amplification systems.
Design, Fabrication and Characterization of Dispersive Mirrors for Ultrafast Lasers

Weidong Shen,Qun Ma,Zhenyue Luo,Shuna Zhang,Yueguang Zhang,Xu Liu

DOI: https://doi.org/10.1117/12.888171

2010-01-01

Abstract:The design, fabrication and characterization of the dispersive multilayers are presented in this paper. Two kinds of dispersive mirror (High dispersion and 700-900nm Gires-Tournois mirrors) are designed by employing Particle Swarm Optimization method which demonstrates fast convergence speed and less dependence on the initial parameters. The mirrors are experimentally fabricated by home-made dual ion beam sputtering system with stable deposition rate and high density. A white light interferometry is built for precisely measuring the dispersion properties. A novel wavelet-based differentiation approach is introduced with considerable resistance to measurement error. The good agreement between the measured and designed results verifies the accuracy of both the fabrication and characterization method. Finally, two applications of Yb-doped photonic crystal fiber laser and Ti:Sapphire crystal oscillation cavity, which use our fabricated mirrors for dispersion compensation, are presented. Good output characteristics of both the two ultrafast laser systems are obtained.
1015-1080 Nm Tunable Polarization-Maintaining Dissipative Soliton Mode-Locked Fiber Laser

Zou Feng,Yang Xuezong,Pan Weiwei,Bai Yang,Li Qiurui,He Bing,Zhou Jun

DOI: https://doi.org/10.3788/cjl201744.0901005

2017-01-01

Abstract:An all-normal dispersion tunable mode-locked fiber laser with a nonlinear amplifying loop mirror is experimentally investigated. The laser employs an all-polarization-maintaining figure-8 cavity consisted of main loop and nonlinear amplifying loop mirror. At 1030 nm, the stable mode-locked laser is initiated by adjusting two loops' pump power, which delivers pulse width of 17.61 ps, repetition frequency of 4.133 MHz, and average power of 2.151 mW. A tunable filter is employed in the cavity to select the laser wavelength as well as force the laser operating in all-normal dispersion dissipative regime. The wavelength tuning range is 1015-1080 nm while the pulse duration ranges from 7.86 ps to 17.80 ps.
In-situ aligned all-polarization-maintaining Er-doped fiber laser mode-locked by a nonlinear amplifying loop mirror

Xiang Zhang,Kangrui Chang,Haobin Zheng,Yongzhuang Zhou,Yong Shen,Hongxin Zou

2024-06-14

Abstract:Despite the wide applications for high-repetition-rate mode-locked fiber lasers, challenges persist in shortening the cavity length and coupling the fiber collimators for most existing techniques. Here, we introduce a novel collimator alignment method and demonstrate an all-polarization-maintaining erbium-doped fiber laser that contains a nonlinear amplifying loop mirror with a repetition rate of 213 MHz. Compared to the conventional method, we achieve in-situ alignment of the collimators in a simplified two-step process. Besides, through a comparison of the spectra from the output ports of the laser, we assess their quality and establish the spectral evolution relationships among these ports. It is found that, in addition to the widely believed large nonlinear effects, spectral interference also plays a significant role in spectral distortion. Moreover, a transition between different stability states is observed from the power variation of the single pulse.

Optics,Pattern Formation and Solitons
An All Polarization-Maintaining Fiber Laser Mode Locked by Nonlinear Amplifying Loop Mirror with Different Biases

Xuanyi Liu,Guanyu Liu,Renlai Zhou,Dan Yu,Jiaye Wu,H. Y. Fu,Zhigang Zhang,Qian Li

DOI: https://doi.org/10.1088/1555-6611/ab964b

IF: 1.2

2020-01-01

Laser Physics

Abstract:We report on an erbium-doped, mode-locked fiber laser incorporated with various phase-biased nonlinear amplifying loop mirrors. Our cavity employs all polarization-maintaining fibers so that the laser is environmentally stable and insensitive to thermal and mechanical perturbations. The laser with a pi/2 phase bias directly delivers 1.20 ps pulses at a repetition rate of 88.2 MHz. The output power is 37.0 mW and the single-pulse energy is similar to 0.42 nJ, when the pump power is 450 mW. Since the phase bias plays an important role in enhancing self-starting properties, we mainly investigate the self-starting threshold and the phase noise of the fiber oscillator using three diverse phase biases. It is found that compared with lambda/6 and lambda/10 waveplates, the laser employing a lambda/8 waveplate has a lower self-starting threshold and higher phase noise.
Research Advances in Mode-Locked Fiber Lasers Based on Nonlinear Loop Mirror

Zhou Jiaqi,Pan Weiwei,Zhang Lei,Gu Xijia,Feng Yan

DOI: https://doi.org/10.3788/cjl201946.0508013

2019-01-01

Abstract:To improve the environmental stability and self-starting ability, researchers have developed the nonlinear optical-loop mirror and nonlinear amplifying-loop mirror (NALM) mode-locking technologies. The developing process of these technologies can be summarized as the following three phases: non-polarization-maintaining (PM) structures with polarization controllers, PM figure-of-8 cavity structures with dual-gain, and PM figure-of-9 cavity structures with a phase shifter. Among these, the newly invented figure-of-9 NALM mode-locked fiber laser is particularly advantageous owing to its easy self-starting ability, long-term stability, concise structure, and cost-effectiveness. Such a mode-locked fiber laser is increasingly employed in applications such as optical frequency combs, generation of THz radiation, and advanced material micromachining.
870 Fs, 448 Khz Pulses from an All-Polarization-maintaining Yb-doped Fiber Laser with a Nonlinear Amplifying Loop Mirror.

Shangming Ou,Guanyu Liu,Liang Guo,Zhigang Zhang,Qingmao Zhang

DOI: https://doi.org/10.1364/ao.57.005068

IF: 1.9

2018-01-01

Applied Optics

Abstract:We demonstrate a mode-locked long all-polarization-maintaining fiber laser with a nonlinear amplifying loop mirror. The fiber oscillator directly delivers 221 ps chirped pulses at the repetition rate of 448 kHz. The pulses can be further amplified up to 134 nJ and compressed down to 870 fs by a grating pair. This kind of laser is self-starting and stable long term, and it has potential application in high-power fiber amplification for industrial applications. (c) 2018 Optical Society of America
Semi-linear all-polarization-maintaining Yb-doped fiber laser oscillator manifesting dual operation regime at net anomalous dispersion

Mateusz Pielach,Agnieszka Jamrozik,Katarzyna Krupa,Yuriy Stepanenko

DOI: https://doi.org/10.1109/JLT.2023.3306595

2023-07-19

Abstract:Ultrafast all-fiber Yb-doped fiber oscillators are usually associated with all-normal-dispersion cavities, which operate in a dissipative soliton regime, quintessential for pulsed operation at the wavelength of 1 {\mu}m. This work presents an all-polarization-maintaining Yb-doper fiber laser oscillator that operates in a dispersion-managed dissipative soliton regime, thanks to incorporating a chirped fiber Bragg grating. The oscillator, mode-locked via a nonlinear optical loop mirror, has an unconventional semi-linear cavity of net anomalous dispersion. Unlike in standard ring resonators, the ultrashort pulse undergoes amplification twice per cavity roundtrip. Additionally, we report a duality of pulsed operation states depending on the pumping power. Strikingly, the oscillator can work in a~subregime similar to the standard dissipative soliton, facilitating further energy scaling at anomalous dispersion. We characterize the low-noise setup capable of delivering pulse energy as high as 6.4 nJ using standard single-mode polarization-maintaining optical fibers.

Optics
A novel actively and passively mode locked fiber laser with dispersion-imbalanced loop mirror

Zhihong Li,Caiyun Lou,Kam Tai Chan,Yizhi Gao

DOI: https://doi.org/10.1016/S0030-4018(00)01043-9

IF: 2.4

2000-01-01

Optics Communications

Abstract:In this letter, a dispersion imbalanced loop mirror (DILM) was constructed by the use of one segment of high dispersion fiber and another segment of much lower dispersion. Based on the nonlinear switching properties of the DILM, a 10 GHz actively and passively mode locked fiber laser was demonstrated for the first time to our knowledge. In this laser, the DILM was acted as not only a passive element to make further compression of the pulse but also an in-band ASE filter to increase the stability of the laser. Optical pulses possessing narrow pulse width (3.1 ps) and low timing jitter (400 fs) were generated successfully.
Raman Dissipative-soliton Generation with a Nonlinear Optical Loop Mirror in a Polarization Maintaining Fiber Cavity

Jiaqi Zhou,Weiwei Pan,Yan Feng

DOI: https://doi.org/10.1109/ICOCN.2019.8934071

2019-01-01

Abstract:We report a Raman dissipative soliton generated in a mode-locked fiber laser with a nonlinear optical loop mirror. This configuration provides a method to obtain linearly polarized ultrafast laser at flexible wavelengths.
313 Mhz Repetition Rate Mode-Locked Yb: Fiber Laser with Phase-Biased Nonlinear Amplifying Loop Mirror

Guanyu Liu,Xinghe Jiang,Bo Wang,Tongxiao Jiang,Aimin Wang,Zhigang Zhang

DOI: https://doi.org/10.1088/1612-202x/aa772a

IF: 1.704

2017-01-01

Laser Physics Letters

Abstract:We demonstrate a self-starting 313 MHz repetition rate, 77 fs Yb: fiber laser incorporated with a phase-biased nonlinear amplifying loop mirror and intra-cavity dispersion compensation. Although all of the fibers are non-polarization-maintaining, the mode locking is environmentally stable.
Low-repetition-rate, high pulse energy all-polarization-maintaining Er-doped fiber laser mode-locked with a nonlinear amplifying loop mirror

Ji Sun,Yue Zhou,Zhaoyang Ge,Jie Yin,Feifei Yin,Jian Dai,Tian Zhang,Kun Xu

DOI: https://doi.org/10.1088/1612-202X/ab0c8e

IF: 1.704

2019-10-07

Laser Physics Letters

Abstract:We demonstrate a low repetition rate mode-locked Er-doped fiber laser using an all-polarization-maintaining (PM) nonlinear amplifying loop mirror. Stable single pulse generation had a pulse energy of 4 nJ and a repetition rate as low as 1.96 MHz. A section of standard single mode PM fiber was used to compress the output pulses from 2.5 ps down to 660 fs, being nearly transform-limited. The robust mode-locking design and all-PM cavity make this fiber laser stable and compact. The output average power fluctuation is within 0.17% over 10 h. Therefore, this source is ideally suitable for high pulse energy applications, such as micro-machining and nonlinear microscopy through further amplification.

optics,physics, applied
Wavelength-tunable 1104 Nm Nonlinear Amplifier Loop Mirror Laser Based on a Polarization-Maintaining Double-Cladding Fiber.

Kong Gao,Yizhou Liu,Wenchao Qiao,Yuzhi Song,Xian Zhao,Aimin Wang,Tao Li

DOI: https://doi.org/10.1364/ol.445683

2021-01-01

Abstract:An ytterbium-doped stretched-pulse mode-locked fiber oscillator was fabricated by applying a nonlinear amplifier loop mirror (NALM). The fiber cavity was built using a large-mode area (LMA) polarization-maintaining (PM) double-cladding (DC) fiber. The central wavelength of the generated 24.7 MHz laser can be modified from 1034 to 1104 nm by tuning the intra-cavity loss. The output power of this laser with a wavelength of 1104 nm at the transmission and reflection ports is 7.61 and 0.33 mW, respectively. The corresponding compressed pulse durations are 192 and 187 fs, which are 1.54 and 1.02 times the Fourier-transform-limited pulse duration, respectively.
All-polarization-maintaining NALM mode-locked Er/Yb-doped large-mode-area fiber oscillator

Kuilei Yang,Lei Feng,Kun Wei,Cuiling Liu,Huiye Zhu,Chunyu Guo,Peiguang Yan,Shuangchen Ruan,Jinzhang Wang

DOI: https://doi.org/10.1364/OL.468918

2022-10-01

Abstract:We report a mode-locked high-power all-polarization-maintaining Er/Yb-doped large-mode-area fiber oscillator based on a bias nonlinear amplifying loop mirror (NALM). The oscillator can generate ∼1-nJ femtosecond pulses without dispersion compensation. By inserting a Martinez-type compensator to provide normal dispersion, it can generate >10-nJ picosecond dissipative solitons (DSs). The measured M2 factors are below 1.5, indicating a good beam quality. When the cavity dispersion is tuned to be ∼0.704 ps2, the oscillator can deliver chirped DSs with an average power as high as 690 mW at a repetition rate of 49.86 MHz, corresponding to a pulse energy of ∼13.8 nJ. The pulse after compression has a near Fourier-limited width of ∼2 ps. Successful demonstration of this laser provides a robust scheme for improving the performance of ultrafast fiber lasers in average power and pulse energy.
Studying the Operation of an All-PM Yb-Doped Fiber Laser Oscillator at Negative and Positive Net Cavity Dispersion

Mateusz Pielach,Jan Szczepanek,Katarzyna Krupa,Yuriy Stepanenko

DOI: https://doi.org/10.1109/access.2022.3170921

IF: 3.9

2022-05-06

IEEE Access

Abstract:Chirped fiber Bragg gratings in Yb-doped fiber lasers allow tuning the net cavity dispersion, thus enabling access to pulse dynamics beyond the typical all-normal-dispersion dissipative soliton regime. This Letter demonstrates an ultrafast dispersion-managed all-polarization-maintaining fiber oscillator mode-locked with a nonlinear optical loop mirror. Using a chirped fiber Bragg grating inside the oscillator, it can work at net cavity dispersion in the range from up to and above at the wavelength of . Depending on the configuration, the system can deliver stable pulses with energies up to 2.3 nJ and pulse durations as short as 98 fs.
All-polarization-maintaining Nd-doped ultrafast fiber laser oscillator at 929 nm mode-locked via a 3x3 nonlinear amplifying loop mirror

Mateusz Pielach,Agnieszka Jamrozik,Katarzyna Krupa,Yuriy Stepanenko

DOI: https://doi.org/10.1364/oe.530457

IF: 3.8

2024-08-18

Optics Express

Abstract:Mateusz Pielach, Agnieszka Jamrozik, Katarzyna Krupa, Yuriy Stepanenko Successful generation of ultrashort pulses in the spectral region of 920 nm using Nd-doped fibers requires effectively suppressing the ... [Opt. Express 32, 31672-31682 (2024)]

optics
Reflective and Transmissive Characteristics in an All-polarization-maintaining Linear-cavity Fiber Laser Mode-locked by Nonlinear Polarization Evolution

Siwei Peng,Xuanyi Liu,H. Y. Fu,Qian Li

DOI: https://doi.org/10.1109/ACP55869.2022.10088781

2022-01-01

Abstract:An erbium-doped all-polarization-maintaining fiber laser with a linear cavity mode-locked by nonlinear polarization evolution is demonstrated, delivering a 447.8-fs, 105.8-MHz soliton pulse. Performance comparisons between reflective and transmissive characteristics are presented by dual-output ports.

Dispersion management of a nonlinear amplifying loop mirror-based erbium-doped fiber laser

Broadband Noise-Like Pulse Generation at 1 Μm Via Dispersion and Nonlinearity Management.

Dispersive Mirrors for High Third-Order Dispersion Compensation in Femtosecond Amplification Fiber Laser System

Vector-dispersion Compensation and Pulse Pedestal Cancellation in a Femtosecond Nonlinear Amplification Fiber Laser System.

High-dispersive Mirror for Pulse Stretcher in Femtosecond Fiber Laser Amplification System

Design, Fabrication and Characterization of Dispersive Mirrors for Ultrafast Lasers

1015-1080 Nm Tunable Polarization-Maintaining Dissipative Soliton Mode-Locked Fiber Laser

In-situ aligned all-polarization-maintaining Er-doped fiber laser mode-locked by a nonlinear amplifying loop mirror

An All Polarization-Maintaining Fiber Laser Mode Locked by Nonlinear Amplifying Loop Mirror with Different Biases

Research Advances in Mode-Locked Fiber Lasers Based on Nonlinear Loop Mirror

870 Fs, 448 Khz Pulses from an All-Polarization-maintaining Yb-doped Fiber Laser with a Nonlinear Amplifying Loop Mirror.

Semi-linear all-polarization-maintaining Yb-doped fiber laser oscillator manifesting dual operation regime at net anomalous dispersion

A novel actively and passively mode locked fiber laser with dispersion-imbalanced loop mirror

Raman Dissipative-soliton Generation with a Nonlinear Optical Loop Mirror in a Polarization Maintaining Fiber Cavity

313 Mhz Repetition Rate Mode-Locked Yb: Fiber Laser with Phase-Biased Nonlinear Amplifying Loop Mirror

Low-repetition-rate, high pulse energy all-polarization-maintaining Er-doped fiber laser mode-locked with a nonlinear amplifying loop mirror

Wavelength-tunable 1104 Nm Nonlinear Amplifier Loop Mirror Laser Based on a Polarization-Maintaining Double-Cladding Fiber.

All-polarization-maintaining NALM mode-locked Er/Yb-doped large-mode-area fiber oscillator

Studying the Operation of an All-PM Yb-Doped Fiber Laser Oscillator at Negative and Positive Net Cavity Dispersion

All-polarization-maintaining Nd-doped ultrafast fiber laser oscillator at 929 nm mode-locked via a 3x3 nonlinear amplifying loop mirror

Reflective and Transmissive Characteristics in an All-polarization-maintaining Linear-cavity Fiber Laser Mode-locked by Nonlinear Polarization Evolution