Abstract:Textile Research Journal, Ahead of Print. Carbon fiber-reinforced epoxy matrix composite laminates have been widely used in the case of advanced aero-engines, due to their high specific mechanical properties and mature production technology. In order to predict accurately the transverse mechanical properties of composites, this paper developed a multiscale analysis method which consists of three scales: At the microscale, an interfacial cohesive zone model is established based on atomic potential energy to describe the interface. At the mesoscale, a unit cell model is established to represent the fiber, matrix, and interface. At the macroscale, the homogenization method, failure criteria, and damage degradation models are utilized to predict transverse mechanical properties. The results of predictions are compared with experimental tests, and it is found that the maximum errors are less than 3%. Furthermore, the predicted damage evolution path aligns with the experimental results, thus validating the accuracy of the multiscale analysis method. By employing the multiscale analysis method, the effects of interfacial strength on the macroscopic transverse mechanical properties are analyzed. The simulation results indicate that: The interfacial strength has a more pronounced influence on the transverse strength and ultimate strain compared with the transverse modulus. Reducing the interfacial strength has a greater influence on the transverse modulus, strength, and ultimate strain than increasing the interfacial strength. The interfacial cohesive zone model can reflect the nonlinearity of epoxy matrix composite materials. Overall, the multiscale analysis method proves to be effective in accurately predicting the transverse mechanical properties of composites, and provides insights into the interfacial strength's role in these properties.

Fracture mechanism and fracture morphology of multi-dimensional braided carbon fiber/epoxy resin composites

ANALYSIS OF INTERFACE CRACKS AT A FIBER END

X-ray microtomography analysis of the damage mechanisms in 3D circular braided carbon fiber/epoxy resin composite tubes under axial impact compression

Micro-XCT Characterization and Numerical Analysis of Bending Damage Mechanism in Carbon Fiber Plain, Twill and Winding Composite Tubes

Mechanical Properties Testing and Failure Mechanism Analysis of 3D Woven Carbon/epoxy Composites

STUDIES ON TENSILE PROPERTIES OF BRAIDED STRUCTURAL COMPOSITE MATERIALS

Experimental Study on the Mechanical Behavior and Failure Mechanism of 3d MWK Carbon/epoxy Composites under Quasi-Static Loading

Analysis of in-plane compression failure mechanism in carbon fiber braided composite with different off-axial angles

Research on the Impact Damage and Fracture Behaver of Braided Composites

Experimental and numerical study of in-plane compressive properties and failure of 3D six-directional braided composites with large braiding angle

Meso-scale modeling and damage analysis of carbon/epoxy woven fabric composite under in-plane tension and compression loadings

Experimental study on the fabrication, high-temperature properties and failure analysis of 3D seven-directional braided composites under compression

Failure behavior and damage visualization of thick carbon/aramid hybrid woven composites under flexural loading conditions

Fracture Characteristics and Energy Dissipation of Textile Bamboo Fiber Reinforced Polymer

Flexural progressive damage and failure behavior of carbon-aramid/epoxy hybrid woven composites

Frictional Sliding of Microcracks under Compression

CRACK DAMAGE AND GROWTH BEHAVIOR OF BRAIDED COMPOSITE

High-Strain-Rate Compression Behavior and Failure Mechanism of 3d Mwk Carbon/Epoxy Composites

Study on intralaminar crack propagation mechanisms in single- and multi-layer 2D woven composite laminate

Multiscale analysis method and experiments for the transverse mechanical property of unidirectional fiber-reinforced composites

Evaluation of Carbon Fiber/epoxy Interfacial Strength in Transverse Fiber Bundle Composite: Experiment and Multiscale Failure Modeling