Abstract:The generalized stacking fault energy (GSFE) is a material property that can provide invaluable insights into describing nanoscale plasticity phenomena in crystalline materials. Lattice strains have been suggested to influence such phenomena. Here, the GSFE curves for sequential faulting pathways in dual phase [face-centered cubic (fcc) and hexagonal close-packed (hcp)] ${\mathrm{Cr}}_{20}{\mathrm{Mn}}_{20}{\mathrm{Fe}}_{20}{\mathrm{Co}}_{20}{\mathrm{Ni}}_{20}, {\mathrm{Cr}}_{25}{\mathrm{Fe}}_{25}{\mathrm{Co}}_{25}{\mathrm{Ni}}_{25}, {\mathrm{Cr}}_{20}{\mathrm{Mn}}_{20}{\mathrm{Fe}}_{34}{\mathrm{Co}}_{20}{\mathrm{Ni}}_{6}, {\mathrm{Cr}}_{20}{\mathrm{Mn}}_{20}{\mathrm{Fe}}_{30}{\mathrm{Co}}_{20}{\mathrm{Ni}}_{10}$, and ${\mathrm{Cr}}_{10}{\mathrm{Mn}}_{30}{\mathrm{Fe}}_{50}{\mathrm{Co}}_{10}$ high-entropy alloys are investigated on ${{111}}_{\text{fcc}}$ and ${(0002)}_{\text{hcp}}$ close-packed planes using density-functional calculations. The dependence of GSFEs on imposed volumetric and longitudinal lattice strains is studied in detail for ${\mathrm{Cr}}_{20}{\mathrm{Mn}}_{20}{\mathrm{Fe}}_{20}{\mathrm{Co}}_{20}{\mathrm{Ni}}_{20}$ and ${\mathrm{Cr}}_{10}{\mathrm{Mn}}_{30}{\mathrm{Fe}}_{50}{\mathrm{Co}}_{10}$. The competition between various plastic deformation modes is discussed for both phases based on effective energy barriers determined from the calculated GSFEs and compared with experimentally observed deformation mechanisms. The intrinsic stacking fault energy, unstable stacking fault energy, and unstable twinning fault energy are found to be closely related in how they are affected by applied strain. The ratio of two of these planar fault energies can thus serve as characteristic material property. An inverse relationship between the intrinsic stacking fault energy in the hcp phase and the axial ratio ${(c/a)}_{\text{hcp}}$ is revealed and explained via band theory.

Insights into plastic deformation mechanisms of austenitic steels by coupling generalized stacking fault energy and semi-discrete variational Peierls-Nabarro model

Effect of Stacking Fault Energy and Austenite Strengthening on Martensitic Transformation in Fe-Mn-Si Alloys

Effect of strain on generalized stacking fault energies and plastic deformation modes in fcc-hcp polymorphic high-entropy alloys: A first-principles investigation

Effect of interstitial-driven lattice expansion on the stacking fault energy in austenitic steels

Atomic origins of the plastic deformation micro-mechanisms of γ/γ’ FeCoNiAlTi high-entropy alloys

Deformation Microstructure and Deformation-Induced Martensite in Austenitic Fe-Cr-Ni Alloys Depending on Stacking Fault Energy

Effects of stacking fault energy on the deformation behavior of CoNiCrFeMn high-entropy alloys: A molecular dynamics study

Understanding Orientation-Dependent Plasticity in Laser Beam Powder Bed Fusion Stainless Steel Through Crystal Plasticity Modelling

Origins of strengthening and toughening effects in twinned nanocrystalline alloys of low stacking fault energy with heterogeneous grain structure

First-principles study of the Mn, Al and C distribution and their effect on the stacking fault energies in austenite

The effect of stacking fault energy on the formation of nano twin/HCP during deformation in FCC concentrated solid solution (CSS) alloys

Stacking Fault Energy Determination in Fe-Mn-Al-C Austenitic Steels by X-ray Diffraction

Microstructure-Based Modeling of Deformation in Steels Based on Constitutive Relationships from Micropillar Compression

Influence of stacking fault energy on friction of nanotwinned metals

On the Stacking Fault Energy Evaluation and Deformation Mechanism of Sanicro-28 Super-Austenitic Stainless Steel

Assessment of the thermodynamic dimension of the stacking fault energy

Insight into indentation-induced plastic flow in austenitic stainless steel

Stacking fault and transformation-induced plasticity in nanocrystalline high-entropy alloys

Molecular dynamics study on the strengthening mechanisms of Cr–Fe–Co–Ni high-entropy alloys based on the generalized stacking fault energy

Stacking fault energy prediction for austenitic steels: thermodynamic modeling vs. machine learning

Alloy Model for the Stacking Fault Energy