Abstract:Stacking fault energy (SFE) is related to activating complex high strength and ductility mechanisms such as transformation-induced plasticity and twinning-induced plasticity effects. This type of energy can be estimated by many different methods and its importance is in its ability to predict microstructure and phase transformation behavior when the material is submitted to stress/strain. In order to study the SFE, chemical composition, and microstructure relationships, eleven different welding parameters were chosen to obtain a large range of dilution levels. A new tubular wire electrode of high-manganese steel (21 wt pct Mn) was used as the consumable and an SAE 1012 steel plate (0.6 wt pct Mn) as the base metal in a flux-cored arc welding process. These welding parameters were related to the phases formed and phase transformation behavior in the fusion zone. The SFE of the austenite phase was calculated using a thermodynamic model. The welding parameters produced SFE values in the range of − 5 to 7 mJ/m2. \(\epsilon \)-martensite and austenite were observed in all samples, but \(\alpha \)′-martensite was only found in those that presented negative SFE values, i.e., those with lower Mn content. Chemical Gibbs Free energy was the component with the most influence on the SFE. Nanoindentation detected the phase transformations during hardness testing for the medium and low dilution levels used, while the high dilution levels presented the highest hardness and modulus of elasticity values, and the lowest elastic and plastic deformation values. The results provide an improved method to develop high-manganese steels with microstructure control through welding parameters.

Stacking fault energy prediction for austenitic steels: thermodynamic modeling vs. machine learning

Prediction and Rational Design of Stacking Fault Energy of Austenitic Alloys Based on Interpretable Machine Learning and Chemical Composition

Towards stacking fault energy engineering in FCC high entropy alloys

Predicting the Stacking Fault Energy of Austenitic Fe-Mn-Al (si) Alloys

Accelerating the prediction of stacking fault energy by combining ab initio calculations and machine learning

A statistics-based study and machine-learning of stacking fault energies in HEAs

Stacking Fault Energy Determination in Fe-Mn-Al-C Austenitic Steels by X-ray Diffraction

Predicting the stacking fault energy in FCC high-entropy alloys based on data-driven machine learning

Deformation Properties of Austenitic Stainless Steels with Different Stacking Fault Energies

Can experiment determine the stacking fault energy of metastable alloys?

A Local Concentration-based Descriptor Predicting the Stacking Fault Energy of Refractory High Entropy Alloys

Thermodynamic Calculation of Stacking Fault Energy in Fe–Mn–Si Shape Memory Alloys

Thermodynamic Stacking Fault Energy, Chemical Composition, and Microstructure Relationship in High-Manganese Steels

Correlation analysis of materials properties by machine learning: illustrated with stacking fault energy from first-principles calculations in dilute fcc-based alloys

Accelerated Prediction of Stacking Fault Energy in FCC Medium Entropy Alloys using Multilayer Perceptron Neural Networks: Correlation and Feature Analysis

Design of High Entropy Superalloy FeNiCrAlCu using Computational Thermodynamic and Machine Learning: Effect of Alloying Compositions and Temperatures on the Stacking Fault Energy

Effect of Temperature on the Stacking Fault Energy and Deformation Behaviour in 316L Austenitic Stainless Steel

Stacking fault energy of face-centered cubic metals: thermodynamic and ab initio approaches

Nitrogen in chromium–manganese stainless steels: a review on the evaluation of stacking fault energy by computational thermodynamics

Stacking Fault Energies in Austenitic Stainless Steels

Charge-density based evaluation and prediction of stacking fault energies in Ni alloys from DFT and machine learning