Abstract:Good gas permeability is an essential factor for the smooth operation and high performance in the lower part of the blast furnace. Under the present low carbon blast furnace smelting conditions, the coke layer is thinner, and the proportion of the molten metal in the coke layer is significantly higher, resulting in a major reduction in gas permeability, which seriously affects blast furnace operations. Also, the lower thickness of the coke layer weakens the process of solid-liquid carbon dissolution when the molten iron passes through the coke layer, which reduces the carbon content of the molten iron and further deepens the erosion of the refractory by the unsaturated molten iron. The carbon dissolution in the molten iron in a blast furnace core was measured by a high-temperature vacuum wettability test tool that analyzed the interface wetting activity between Fe−C melts with specific carbon mass fraction (3.8%, 4.3%, 4.8%) and 99.9% of high temperatures graphite plates. Besides, the scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS) were used to analyze the graphite substrate’s carburizing morphology and carburizing distances. The results show that, with the increase of carbon content, the interface contact angle becomes bigger. The contact angle decreases with time, and eventually reaches a steady-state during the melting process, and the Fe−C melt with saturated carbon cannot be wet. The scanning electron microscopy analysis shows that a spherical cap-like depression is created by a cross-section of the Fe−C melt and the graphite substrate, and the radius and volume of the depression decrease with increasing carbon content. The study of the EDS scanning analysis shows that the amount of dissolved carbon atoms in the graphite substrate penetrates the Fe−C melt and decreases with increasing initial carbon concentration. The smaller the carburizing effect, the better the wetting is conducive to carbon mass transfer. It is found that by measuring carburizing of the carbon atoms in the graphite substrate into the Fe−C melt by calculating the surface energy reduces the surface energy between the two. Thus, the surface tension decreases and the melt spreads slowly with contact angle gradually decreasing during melting.

AN INVESTIGATION ON MESOPORE EVOLUTION MECHANISM OF ACTIVATED CARBON SPHERES BY EXAMINING THE CHANGE OF IRON STATE

Study on modification of carbon fiber and performance of carbon paper as gas diffusion layer

Examining the change of iron state

Wetting and Spreading Behavior of Molten Iron in Contact with Graphite Substrate: Interfacial Effects

Interface Wetting Behavior Between Iron and Coke During the Carbon Dissolution Process in a Blast Furnace

Hierarchical Pore Structure of Activated Carbon Fabricated by CO2/microwave for Volatile Organic Compounds Adsorption

Synthesis, characterization and adsorption capacity of magnetic carbon composites activated by CO2: implication for the catalytic mechanisms of iron salts

Effect of Oxidative Stabilization on the Sintering of Mesocarbon Microbeads and A Study of Their Carbonization

AN INVESTIGATION ON PREPARATION OF ACTIVATED CARBON FROM HAW- STONE RESIDUE

Investigation of methane decomposition and carburization with iron: the combination of a ReaxFF molecular dynamics simulation and experimental work

The investigation on microstructure change of activated carbon fiber by oxidation

Analysis of the evolution of the pore size distribution and the pore network connectivity of a porous carbon during activation

Investigating the effects of activating agent morphology on the porosity and related capacitance of nanoporous carbons

Investigation on spectroscopy characteristics of different metamorphic degrees of coal-based graphite

Preparation of Activated Carbon Microspheres from Phenolic Resin with Metal Compounds by Sub- and Supercritical Water Activation

EFFECTS OF PROCESS PARAMETERS ON STRUCTURE OF NATURAL ZEOLITE TEM PLATED POROUS CARBON

The study of silver-supported phenolic resin-based spherical activated carbon

Evolution Mechanism of Carbon Covalent Bond during Coal Activation Using Mixed Atmosphere of H2O and CO2

Effect of residual carbon on the phase transformation and microstructure evolution of alumina-mullite fibers prepared by sol-gel method

Investigation on the Desulfurization Behavior of Activated Char

Investigation on coking deactivation behavior of molecular sieve catalysts