Synthesis, structure and porosity analysis of microporous and mesoporous carbon derived from zirconium carbide
R.K. Dash,G. Yushin,Y. Gogotsi
DOI: https://doi.org/10.1016/j.micromeso.2005.05.047
IF: 5.876
2005-11-01
Microporous and Mesoporous Materials
Abstract:Many applications of porous carbons demand control of pore size and its distribution. One of the most promising ways to mass-produce carbon with the desired porosity is by etching of non-carbon species from inorganic carbon containing materials, such as metal carbides. In this work, carbon was synthesized from zirconium carbide, ZrC0.98, in a chlorine environment in the temperature range of 200–1200°C. Thermodynamic simulation shows the possibility of carbon formation in a broad range of temperature. The structure of the resultant carbon analyzed using Raman spectroscopy, X-ray diffraction (XRD) and transmission electron microscopy (TEM), shows that ordering of carbon took place with increase in synthesis temperature. Porosity analyzed using gas sorption technique shows that carbon produced at low temperature (300–600°C) has small pores with narrow pore size distribution; whereas carbon produced at high temperature (800–1200°C) has large pores with wider pore size distribution. In comparison with other carbide derived carbons, B4C and Ti3SiC2, whose pore size and its distribution do not change appreciably in 200–1000°C range; carbon produced from ZrC can have both narrowly distributed micropores and mesopores depending upon the temperature of synthesis. As in carbons produced from other carbides, both the structure and porosity were found to depend on the synthesis temperature.
materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology, applied