Abstract:Fe 3 C as an intermediate often can be detected during catalytic decomposition of methane over Fe-based catalysts due to the dissolving of carbon in the bulk of Fe. However, the activity of Fe 3 C for methane decomposition is still unclear. In this work, Fe 3 C nanoparticles were prepared using melamine as carbon source mixed with Fe(NO 3 ) 3 via sol–gel method. The effects of the ratio of melamine to Fe(NO 3 ) 3 , reaction temperature and CO 2 -regeneration performances on catalytic methane decomposition (CMD) were investigated on a fixed-bed reactor. Results showed that the prepared catalyst performed better catalytic activity and stability for methane decomposition owing to smaller Fe 3 C nanoparticles with better dispersion, and typical core–shell structure with Fe 3 C core surrounded by carbon shell was obtained when the ratio of melamine to Fe(NO 3 ) 3 was 2:1. The reaction temperature significantly affected the activity and stability. About 13.2% of CH 4 conversion and 733 mmol/g cat hydrogen output were obtained at 850 °C after 700 min. Besides, the spent catalysts were regenerated by CO 2 . With the increase of regeneration times, the activity and stability of catalyst decreased firstly and then increased. About 96.1% initial CH 4 conversion and 13.5% CH 4 conversion were obtained after reaction of 3500 min for the 4th cycle, along with 3482 mmol/g cat hydrogen output. And the mechanism models of CMD reaction and CO 2 -regeneration over Fe 3 C catalysts was proposed. This work provides a new idea to solve metal sintering problem in catalytic methane decomposition and improve the stability of catalyst.

Investigation of methane decomposition and carburization with iron: the combination of a ReaxFF molecular dynamics simulation and experimental work

Controllable decomposition of CH 4 /CO using Fe 3 C catalyst and carbon structural properties: Combine experimental study with a ReaxFF simulation

Core-shell structured Fe 3 C as high-performance catalyst for methane decomposition

Catalytic methane decomposition on CNT-supported Fe-catalysts

Interfacial Phenomenon and Marangoni Convection of Fe–C Melt on Coke Substrate under in Situ Observation

The Adsorption and Decomposition of Methane on Fe/Cu(110) Bimetallic Surface

Methane decomposition to produce hydrogen and carbon nanomaterials over costless, iron-containing catalysts

Effect of CO 2 Co-Feeding on the Stabilization of Atomically Dispersed Iron Species over MgAl 2 O 4 During Ethane Dehydrogenation Reactions

Effect of Biochar Support on the Catalytic Performance of Fe-based Catalysts for CH4 Cracking

Mechanistic and microkinetic study of non-oxidative methane coupling on a single-atom iron catalyst

Coupling CO2 Reduction with Ethane Aromatization for Enhancing Catalytic Stability of Iron-Modified ZSM-5

Unravelling the Enigma of Nonoxidative Conversion of Methane on Iron Single‐Atom Catalysts

Dynamic redistribution of spin density in the conversion of methane to methanol catalyzed by CHA-Fe zeolite: A Theoretical Investigation

Room-Temperature Methane Conversion by Graphene-Confined Single Iron Atoms

Enhanced Activation and Decomposition of CH4 by the Addition of C2H4 or C2H2 for Hydrogen and Carbon Nanotube Production

Methane Conversion over C2N-Supported Fe2 Dimers

Microscopic mechanism of Ca-catalyzed coal pyrolysis affecting CH 4 generation: A combined ReaxFF MD and DFT study

Optimization of methane catalytic decomposition in a fluidized bed reactor: A computational approach

Mechanism on CMD reaction regulated by supports and promoters of Fe-based catalysts

Influence of graphite crystalline orientation on the carbon dissolution reaction in liquid iron: A ReaxFF molecular dynamics simulation study

Reaction Dynamics of CO2 Hydrogenation on Iron Catalysts Using ReaxFF Molecular Dynamics Simulation